Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Arlington, TX
Gate access control and gate parts repair in Arlington follow a pattern shaped by Blackland Prairie clay, 100-degree summers, and a housing stock built mainly between the late 1960s and early 1990s. Most Arlington gate failures trace back to three root causes: posts that have shifted in expansive soil, hardware corroded or UV-degraded after thirty-plus Texas seasons, or automation that lost its settings during a storm. Call (817) 510-4183 and we’ll send a technician who documents what he finds before any work begins.
Why Arlington Homes Are Different
Arlington sits on thick Blackland Prairie clay that shrinks hard in summer drought and heaves when rain returns. The result is a city where gate posts tilt, rise, and drift out of alignment far more often than in sandier Metroplex soil. A gate that closed cleanly in May can bind against its latch plate by August, not because any hardware failed but because the ground itself moved. In practice this means Arlington repairs frequently require resetting posts in deeper, wider concrete footings than a standard suburban install would call for anywhere west of here.
The housing stock compounds the issue. Most Arlington neighborhoods were built from the late 1960s through the early 1990s: ranch-style and traditional tract homes with drive-through swing gates now thirty to fifty years old. Those original wood posts are reaching end of life, hinges are fatiguing, and latches that worked for decades no longer line up. Meanwhile the newer master-planned communities on the city’s edges, like Viridian, bring ornamental iron and automated slide gates with HOA aesthetic codes that limit what materials and colors can be used. Severe thunderstorms with straight-line winds of 60 to 80 mph routinely knock gates off tracks or bend hinge posts outright, and the February 2021 freeze caused a wave of cracked hydraulic operators and seized water-exposed hardware. Arlington’s dense entertainment corridor around AT&T Stadium and Globe Life Field also means a technician here needs commercial-grade slide gate and barrier arm experience that pure residential suburbs don’t demand.
Our Main Arlington Services
These are the three Arlington service pages homeowners use most, linked below. Each page carries its own pricing detail and local repair notes.
Gate Repair in Arlington
Day-to-day gate repair in Arlington is dominated by post realignment and hinge work on aging swing gates, followed by storm damage repair when straight-line winds hit. We document every adjustment with photos and a written record before we leave. See the full breakdown on our Gate Repair in Arlington page.
Gate Installation in Arlington
New gate installation in Arlington requires footings sized for Blackland Prairie clay, meaning deeper pours than standard suburban work. We also handle HOA aesthetic requirements in communities like Viridian where material and color specs are strict. Details are on the Gate Installation in Arlington page.
Gate Motor & Opener in Arlington
Arlington’s storm season and occasional hard freezes are hard on gate operators. We service nine automation brands including FAAC, BFT, Linear, and Viking, and we document limit-switch and photo-eye settings on every visit. Full information lives on the Gate Motor & Opener in Arlington page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Arlington
Gate access control in Arlington means adding or repairing the system that decides who gets through: keypads, phone entry, card readers, and video intercoms on residential and light commercial gates. The older ranch-style homes in central Arlington are frequently adding keypad or phone entry to an existing swing gate for the first time, while HOA-governed communities on the city’s edges need card reader and video intercom work that satisfies written aesthetic and security requirements. We install and repair all of it, leave a documented photo record on every visit, and put the price in writing before any work starts. This is the work covered on our Gate Access Control service hub.
Keypad Entry
Signs you need it
You’re handing out gate remotes to family, landscapers, or delivery drivers, or the existing keypad works intermittently after rain.
What it costs in Arlington
Keypad entry work in Arlington typically runs $275-$650 depending on whether we’re adding a standalone keypad or replacing one integrated with the gate operator.
How we do it
We verify the operator’s input voltage, mount and seal the keypad against Arlington’s rain and UV exposure, program user codes, and photograph the finished install with the wiring diagram on file.
Video Intercom
Signs you need it
You can’t see or speak to whoever is at the gate before letting them in, or the existing intercom screen has failed after repeated Texas heat exposure.
What it costs in Arlington
Video intercom installation in Arlington typically runs $900-$1,800 depending on wiring distance and whether the gate motor’s control board needs a communication module added.
How we do it
We run or verify the low-voltage wiring, mount the camera and indoor monitor, pair the system to the gate operator, and hand you a written record of every setting and wire path.
What Gate Access Control Costs in Arlington
| Item | Typical range in Arlington |
|---|---|
| Keypad entry add-on or replacement | $275-$650 |
| Phone entry (cellular or landline-based) | $500-$1,100 |
| Video intercom system | $900-$1,800 |
Can you add a keypad to an existing Arlington swing gate?
Yes, as long as the gate operator has an input for a wired or wireless receiver. We match the keypad to the operator’s brand and voltage, then document the programming so you’re not locked out later.
Does Arlington HOA approval matter for access control work?
It can. Viridian and other newer communities often require design review for anything mounted on or near the gate. We provide written specs and photos for your HOA submission, and the install itself carries the same photo documentation.
Gate Parts & Welding in Arlington
Gate parts and welding in Arlington come down to working with what the soil and weather have already done to the gate, not just swapping a broken part. Blackland Prairie clay movement means hinge plates pull away from shifting posts, and Arlington’s 100-degree UV summers degrade powder coat and warp wood frames that are already decades old. We stock common replacement parts and carry welding equipment on the truck for repairs that can’t wait. More detail is on the Gate Parts & Welding hub.
Hinge Replacement
Signs you need it
The gate sags, drags on the ground, or the hinge pin is visibly worn or rusted through after years of Arlington humidity swings.
What it costs in Arlington
Hinge replacement in Arlington typically runs $150-$450 per hinge depending on gate weight and whether the post needs reinforcement.
How we do it
We lift and support the gate, cut or unbolt the failed hinge, weld or bolt a new one in place, and photograph the gate’s final alignment for the record.
Post Replacement
Signs you need it
The post leans visibly, the gate no longer latches, or the concrete footing at the base has cracked from clay soil heave.
What it costs in Arlington
Post replacement in Arlington typically runs $450-$1,200 depending on depth, concrete volume, and whether the old footing must be broken out and removed.
How we do it
We saw or break out the failed post and footing, set a new post in concrete sized for Arlington’s expansive clay, and brace it until the pour cures.
What Gate Parts & Welding Costs in Arlington
| Item | Typical range in Arlington |
|---|---|
| Hinge replacement | $150-$450 per hinge |
| Post replacement with new concrete footing | $450-$1,200 |
| Custom welding repair (cracked frame, bent rail) | $200-$800 |
Can you weld a cracked iron gate in Arlington without replacing the whole frame?
Usually yes. We grind out the crack, weld it, and reinforce the joint if the original design was underbuilt. The repair is photographed and documented before we leave, and the price is written down before we start.
How long does a gate post reset take in Arlington’s clay soil?
The concrete pour itself needs time to cure, so most post resets take a full day on site plus a short wait before heavy gate use resumes. We brace the post during the cure so the gate can stay in place, and we tell you exactly what that wait looks like before we start.
Brands We Service in Arlington
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule automation already on Arlington properties. Common parts are stocked on the truck; anything odd is ordered same-day. See our brands for the full rundown.
Pricing for Gate Repair in Arlington, TX
| Service | Typical range in Arlington |
|---|---|
| Gate Access Control keypad entry | $275-$650 |
| Phone entry system | $500-$1,100 |
| Video intercom | $900-$1,800 |
| Hinge replacement | $150-$450 per hinge |
| Post replacement with new footing | $450-$1,200 |
| Custom welding repair | $200-$800 |
| Gate roller replacement | $120-$400 |
| Rail straightening and alignment | $150-$500 |
What pushes Arlington pricing up is usually the soil: excavation for deeper footings, breaking out concrete that has cracked, or resetting multiple posts on a long drive-through gate that heaved unevenly. Whatever the job, the price is written and handed to you before any work starts, and it is the price on the invoice.
Neighborhoods We Serve in Arlington
We run calls across Arlington, from the older ranch-style streets of central Arlington to the HOA-governed communities on the city’s edges. Most repair calls in Arlington can be scheduled within one business day.
- Viridian
- Pantego
- Dalworthington Gardens
- Southwest Arlington
- North Arlington
Service Area - Cities Near Arlington
Our Arlington crews also cover the surrounding cities where the soil and housing stock are similar. If you’re in Grand Prairie, TX, Hurst, TX, Bedford, TX, or Euless, TX, the same written-price and photo-documentation standard applies on every job.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Arlington
Most Arlington repair calls can be scheduled within one business day. The phone is answered by a live person around the clock, so you can reach someone at any hour and get a straight answer on scheduling before you hang up.
Most residential gate repairs and replacements don’t require a permit in Arlington, though HOA design review can apply in communities like Viridian. We can tell you what your specific situation calls for when you call, and we provide written specs for any HOA submission.
Yes. That is the entire point. Every Arlington job gets a written price handed over before any tool comes off the truck, and the invoice at the end matches it. No verbal estimate, no surprise line items, and no work starts until you approve the written number.
For gate access control, welded repairs, or any other gate issue in Arlington, call (817) 510-4183. A live person answers, the estimate is free, and the price is in writing before the work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.