Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Colleyville, TX
Gate access control in Colleyville usually means upgrading an aging estate-home operator with keypad, phone, or video entry, and the work here runs straight into a local reality: most of these custom wrought iron gates went in during the late 1990s and 2000s building boom, and the control boards, keypads, and intercom wiring are now 15 to 25 years old. The Blackland Prairie clay under Colleyville heaves posts seasonally, which throws swing-gate alignment out and causes operators to bind, trip, and refuse commands. Call (817) 510-4183 for a written price before any work starts.
Why Colleyville Homes Are Different
Colleyville is one of the wealthiest municipalities in the DFW metroplex, with more custom automated wrought iron driveway gates per mile than any neighboring city. Most of those gates were installed during the estate-home boom of the late 1980s through the 2000s, on half-acre lots with long private driveways and brick or stone masonry columns flanking the gate leaves. That age matters: the swing-gate operators, control boards, and hinge hardware on those original installs are now well past their expected service life, and the failure pattern on nearly every call is the same: a worn operator, a corroded hinge, or a control board that no longer holds its limit settings.
Underneath it all sits expansive Blackland Prairie clay. Spring rains swell the soil; summer drought shrinks it. Gate posts heave and drift laterally, often by a visible fraction of an inch each season. That movement binds gate leaves against the latch, overloads motors, and throws photo-eyes out of alignment far more severely than in neighboring cities with sandier fill. Compounding the issue, several established Colleyville neighborhoods and HOAs enforce aesthetic covenants requiring gates and pillars to match existing ironwork profiles, so a repair often means sourcing or fabricating matching ornamental pickets and finials rather than bolting on stock hardware.
Our Main Colleyville Services
The two calls we get most from Colleyville homeowners are access-control failures on aging estate gates and metal repairs from clay-soil movement and weather. Here are the three Colleyville service pages with the full detail on each trade.
Gate Repair in Colleyville
The typical Colleyville repair is a swing gate that has sagged or seized because the hinge posts have drifted on expansive clay, or a weld that cracked when the masonry column shifted. We straighten or replace posts, re-hang leaves, repair cracked frame welds, and reset operator limits so the gate closes fully without binding. Many jobs require matching ornamental ironwork to satisfy HOA covenants. Gate Repair in Colleyville
Gate Installation in Colleyville
New installations in Colleyville are usually custom ornamental steel or wrought iron drives on half-acre estate lots with masonry columns already in place. The main local consideration is the clay: posts must be set deep enough to resist seasonal heave, and operators need to be spec’d for heavy custom leaves. We provide a written scope and measured quote before any fabrication begins. Gate Installation in Colleyville
Gate Motor & Opener in Colleyville
Most Colleyville operators are swing-arm or underground units that have outlived their expected lifespan. On these homes, a motor replacement usually also means re-setting the photo-eyes, re-teaching limits, and checking the post alignment that clay movement has thrown off. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Gate Motor & Opener in Colleyville
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Colleyville
Gate access control in Colleyville addresses the electronics that decide who gets in: keypads, remotes, phone entry, card readers, and video intercoms mounted on estate gates that are now 15 to 25 years old. The dominant failure we see is a control board that has lost its program after a power surge or a keypad that has corroded internally from North Texas humidity. On the clay-heavy lots here, a second common failure is a photo-eye misaligned by post drift, which makes the gate refuse to close and the system appear dead. Gate Access Control work in Colleyville almost always includes a photo log of every setting we change and a written record of the replacement part numbers.
Keypad Entry
Signs you need it
A keypad that won’t accept the code, works intermittently, or has cracked buttons from years of direct Texas sun needs replacement.
What it costs in Colleyville
Replacing a gate keypad in Colleyville runs $180 to $340, depending on the brand and whether new wiring is needed.
How we do it
We pull the old unit, run new low-voltage wire if the original has degraded, mount the new keypad, program the codes, and photograph the finish.
Phone Entry
Signs you need it
A phone-entry system that rings endlessly, won’t dial the programmed number, or has a distorted speaker is the most common failure on Colleyville’s older cellular units.
What it costs in Colleyville
Gate phone entry repair in Colleyville runs $220 to $400, with full replacement higher if the control module is obsolete.
How we do it
We test the phone line or cellular signal, replace the failed board or speaker, reprogram the forwarding number, and leave a written record of the settings.
Video Intercom
Signs you need it
A video intercom that shows a black screen, loses audio, or won’t release the gate from the house monitor is failing.
What it costs in Colleyville
Video intercom repair in Colleyville runs $240 to $450, depending on whether the monitor, door station, or both are at fault.
How we do it
We bench-test the monitor and door station, replace the failed component, re-terminate the cable, and document the wiring in a photo log.
What Gate Access Control Costs in Colleyville
| Item | Typical range in Colleyville |
|---|---|
| Keypad replacement | $180-$340 |
| Phone entry repair | $220-$400 |
| Video intercom repair | $240-$450 |
Can you integrate access control with a gate that’s 20 years old?
Yes. Most 15-to-25-year-old Colleyville gates can accept a modern keypad, phone entry, or video intercom as long as the operator has working limit switches. We match the new equipment to the existing voltage and control-board inputs.
How long does an access control upgrade take in Colleyville?
Most single-gate access control replacements in Colleyville are completed in one visit, usually two to four hours. If the old wiring has degraded, we run new low-voltage lines the same day. You get a written price before we start.
Gate Parts & Welding in Colleyville
Gate parts and welding in Colleyville means repairing the iron and steel that carries the entire system: hinges, posts, rail sections, and custom ornamental pickets on gates that are now 15 to 25 years old. Clay-soil heave puts far more stress on hinge welds and frame joints here than in sandier neighboring cities, and HOA covenants often require matching custom finials and pickets rather than standard stock. Gate Parts & Welding work on Colleyville estates frequently involves fabricating a replacement part in our shop when the original is no longer manufactured.
Hinge Replacement
Signs you need it
A gate that sags toward the latch side, scrapes the ground, or shows rust staining around the hinge barrel needs new hinges.
What it costs in Colleyville
Hinge replacement in Colleyville runs $85 to $200 per hinge, depending on the size and whether the post plate is reusable.
How we do it
We cut out the old hinge, weld in the new one, re-hang the leaf, and photograph the alignment before and after.
Post Replacement
Signs you need it
A gate post that has visibly leaned, cracked its masonry column, or pulled the gate out of square has failed and needs replacement.
What it costs in Colleyville
Gate post replacement in Colleyville runs $400 to $900, depending on depth, soil condition, and whether masonry repair is needed.
How we do it
We dig out the old post, set the new one below the clay heave line, re-hang the gate, and record the final plumb in the photo log.
Custom Welding
Signs you need it
Cracked frame joints, broken pickets, or HOA-required ornamental matching that stock hardware can’t satisfy all call for custom welding.
What it costs in Colleyville
Custom gate welding in Colleyville runs $150 to $600, depending on the length of the fracture and the complexity of the fabrication.
How we do it
We clean the fracture, weld it, grind to match the original profile, and document the repair with photos and a written part record.
What Gate Parts & Welding Costs in Colleyville
| Item | Typical range in Colleyville |
|---|---|
| Hinge replacement | $85-$200 per hinge |
| Post replacement | $400-$900 |
| Custom welding | $150-$600 |
Can you match HOA-required ornamental ironwork in Colleyville?
Yes. We fabricate matching pickets, finials, and scrollwork in our shop when standard stock won’t satisfy Colleyville HOA covenants. Bring the HOA’s written requirement and we’ll match the profile.
Do you weld on-site or remove the gate?
Most small and medium welds are done on-site in Colleyville with the gate hung. If the gate is too far out of square or the repair is extensive, we remove the affected section, weld it in the shop, and reinstall it.
Brands We Service in Colleyville
We work on FAAC, Linear, and Viking operators regularly in Colleyville, along with the full range of motors already installed on local estate gates. Common control boards, keypads, and limit switches for these brands are stocked in our DFW parts inventory, so most Colleyville repairs don’t wait on shipping. See our brands for the full list.
Pricing for Gate Repair in Colleyville, TX
| Service | Typical range in Colleyville |
|---|---|
| Keypad replacement | $180-$340 |
| Phone entry repair | $220-$400 |
| Video intercom repair | $240-$450 |
| Hinge replacement | $85-$200 per hinge |
| Post replacement | $400-$900 |
| Custom welding | $150-$600 |
| Remote control programming | $60-$150 |
| Card reader replacement | $250-$500 |
Prices in Colleyville push toward the high end when a gate has been out of alignment long enough to damage the operator, when HOA covenants require custom-fabricated ornamental work, or when clay movement has compromised a post. Every job gets a written price before we start, and that price is the price you pay.
Neighborhoods We Serve in Colleyville
We work across Colleyville, from the estate streets near Church Street to the gated communities off Glade Road and the larger properties near Pleasant Run Road. Response for most Colleyville repairs is same-day or next-morning depending on the time of the call, and we always confirm the written price before dispatching a technician.
- Montclair
- Wimbledon
- Normandy Estates
- McDonwell
- Timberlake
Service Area - Cities Near Colleyville
In addition to Colleyville, our DFW dispatch regularly covers the surrounding northeast Tarrant County area. We serve Bedford, TX, Euless, TX, Southlake, TX, and Hurst, TX with the same written pricing and documented photo record on every visit.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Colleyville
Most Colleyville gate emergencies are dispatched same-day. A gate stuck open is a security issue, so we prioritize it. Call (817) 510-4183 and a live person answers 24/7, every day.
Most repairs on existing gates don’t require a permit in Colleyville, but HOA covenants may govern materials, colors, and ornamental profiles. We match existing ironwork and can provide the written documentation your HOA may request.
We cover all of Colleyville, including the estate neighborhoods off Glade Road, Church Street, and Pleasant Run Road. Dispatch and scheduling are coordinated from our DFW office, and crews serve Colleyville locally with same-day availability on most calls.
Call (817) 510-4183 for a free estimate on any gate repair in Colleyville. A live person answers, the price is written before we start, and every visit leaves you with a photo record of what we found and what we left behind.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Colleyville Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.