Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Arlington
A new driveway gate in Arlington typically runs $2,800 to $7,400 installed, depending on width, material, and automation. Most installations we schedule in Arlington take one to two days on site, with the concrete footing work on day one and the gate hang plus operator wiring on day two. If you’re planning a gate on acreage or a long driveway, power and span are the two numbers that decide everything before we order a single part. Call (817) 510-4183 and we’ll walk the property with you, write down what’s needed, and hand you a flat price before any work starts.
Why Vance Gate Repair Irving Is Arlington’s Preferred Gate Installation Company
Arlington sits on Blackland Prairie clay, and that fact alone drives more of our installation decisions here than anything else. The clay shrinks hard in summer and heaves after rain, which means a footing poured to cookie-cutter suburban depth will let a post tilt within a season or two. We dig deeper here. We also design for the wind: Arlington’s spring storm season regularly throws 60 to 80 mph straight-line gusts at gates that face open exposure, and a double gate that’s fine in a sheltered cul-de-sac will fold its hinges on a long driveway near Matlock Road if nobody planned for it.
Adrian Vance started this company in 2014 doing commercial access-control work, and the documentation habit from that world carried over to every residential gate we install. You get a written price before work starts, a photo log of the footing depth and post alignment before we backfill, and a record of the operator’s limit-switch settings before we leave. That’s Gate Installation work done under the Haven Standard, our written rules for every job: Clause 1 says the price is in writing before tools come off the truck. Clause 4 says every visit leaves evidence.
Our Arlington customers tend to be the ones who’ve already read the three-star reviews on the other guys and want to know what a gate actually costs before they call. We put the ranges on this page for that reason. A live person answers the phone 24/7 at (817) 510-4183. When you call about a gate in Arlington, you’ll get a named technician, not a call center.
Our Gate Installation Services in Arlington
Driveway Gate Installation
Driveway gates in Arlington fall into two rough camps: the 10 to 14 foot single swing gate on an older ranch-style lot, and the 16 to 20 foot double swing or slide gate on newer builds east of Cooper Street and in the Viridian area. The small ones are straightforward. The wide ones need real span math: post diameter, hinge weight rating, and operator torque all change once you pass about 12 feet of leaf width. Most Arlington homes built between the late 1960s and early 1990s have wood privacy fences, and a new gate post set next to an aging fence line often needs its own independent footing rather than sharing the fence post.
Pedestrian Gate Installation
A pedestrian gate next to a driveway gate sounds simple until you think about how Arlington families actually use them: kids walking to school, mail carriers, pool access in the summer. We set these with a smaller swing arc, a self-closing hinge, and a latch height that works for the whole household. In older Arlington neighborhoods where the walkway is narrow between fence and house, we’ll spec a 36-inch gate instead of the standard 42 so the swing doesn’t hit the brick. These usually run $600 to $1,400 installed, including hardware.
Sliding Gate Installation
Sliding gates make sense on Arlington lots where the driveway slopes up from the street or where a swing gate would block the sidewalk. They ride on a track or a cantilever system, and the big expense driver is whether the existing driveway edge can support the concrete track pad without cracking. On Blackland Prairie clay, we float the track pad with a deeper gravel base and reinforcing mesh because the soil moves enough to crack a thin slab in one wet-dry cycle. Most Arlington slide gate installs run $3,500 to $8,000 depending on length and whether automation is included.
Swing Gate Installation
Swing gates are the workhorse of Arlington driveways, especially the double swing configuration on acreage east of town. The hinge post carries the entire load, and that post is only as good as the concrete around it. We pour 48-inch deep footings with a bell-shaped bottom on Arlington clay jobs because that bell shape locks into deeper, more stable soil and resists the lift force that heaves shallower posts. For a standard 14 foot single swing gate on a flat lot, you’re looking at $2,800 to $4,800 without automation. A 16 foot double gate runs higher due to the second post, the sturdier hinges, and the dual operator if you want power.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Arlington
We work on whatever motor is already on the property, and we install the brands that hold up to Arlington’s heat and storm cycles. For most Arlington acreage jobs we spec LiftMaster operators, particularly the LA500 line for dual swing gates. On tighter budgets or smaller gates, Mighty Mule and Elite both make solid residential openers we’re comfortable standing behind. We keep common parts in local stock for these three brands, which means a failed control board or limit switch on your existing gate doesn’t have to wait on a freight shipment.
Common Gate Installation Problems We See in Arlington Homes
- Posts tilting within the first year. This is the signature Arlington failure. Standard 30-inch footings don’t reach below the active clay zone, so the post heaves up in wet weather and tilts when the clay dries. We fix it by re-pouring at 48-inch depth with a bell bottom, but the cheaper fix is drilling deeper the first time.
- Solar operators stalling on hot afternoons. Long driveways without AC power often run on solar, and a panel that’s fine in March can’t keep up with a 16 foot gate’s amp draw when Arlington hits 102°F and the battery is heat-soaked. Undersized panels and under-rated batteries are the two main causes we find.
- Wind damage on long, exposed driveway gates. A double gate acts like a sail in a straight-line wind. Without a center stop post, a mid-height drop rod, or the right operator locks, the wind bows the frame and eventually shears hinge bolts.
- HOA approval surprises in master-planned communities. Arlington’s newer communities, including Viridian, have architectural review processes with specific gate style, color, and automation requirements. We’ve seen installations torn out because nobody filed the paperwork. We handle the submittal documents with the quote.
Pricing for Gate Installation in Arlington, TX
Here are the real numbers for Arlington’s market, as of this writing. A single swing driveway gate, manual, in painted steel or cedar, runs $2,800 to $4,800. A double swing gate on acreage runs $4,500 to $7,400 without automation because you’re paying for two posts, two leaf frames, and the heavier hinges that carry them. Adding a LiftMaster operator to a double swing runs $1,900 to $3,200 extra, and a solar package with panel and battery adds roughly $1,100 to $1,800 if you’re off the power grid. A sliding gate runs $3,500 to $8,000 depending on length and track requirements. Every quote is written, line-itemed, and handed to you before any work starts. That’s Haven Standard Clause 1, and we don’t work any other way. Call (817) 510-4183 for your Arlington estimate.
We Also Serve Cities Near Arlington
Our crews run gate installation jobs across the Mid-Cities and into the surrounding suburbs regularly. We serve Grand Prairie, Hurst, Bedford, and Euless with the same written pricing and documentation standard. If you’re on the edge of Arlington or just outside the line, call us anyway, and we’ll tell you straight whether your address is in range. You can learn more about our work across the metro on our Arlington service page.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Arlington
For any gate post wider than 10 feet of leaf, we pour at a minimum 48-inch depth with a bell-shaped bottom that’s wider than the shaft. Arlington’s clay moves enough within the top 30 to 36 inches to tilt a standard post in one wet-dry season. A deeper, belled footing anchors into stable subsoil and resists the heave. For light pedestrian gates, 36 inches can work, but we’ll tell you if your specific soil sample suggests more. Call (817) 510-4183 and we’ll check your site.
Yes, but the panel and battery must be sized to the gate’s width and the operator’s amp draw, not picked from a one-size-fits-all kit. On a 16 foot double gate running off solar in an Arlington summer, we spec a panel rated 30% above the motor’s peak draw and a deep-cycle battery matched to the cycle count. Undersized solar is the top reason off-grid gates stall here in July and August. We design and install complete solar packages, and every one includes a documented wiring diagram.
For wide double swing gates near livestock, you want a linear arm operator with soft-start and soft-stop, like the LiftMaster LA500. It moves the gate slowly enough at the edges of travel that an animal in the swing path has time to clear, and the built-in obstruction detection reverses the gate if it meets resistance. For slide gates on ranch entrances, a heavy-duty rack-and-pinion operator with a photo-eye across the track is the safer call. We’ll spec the operator to the animal situation, not just the gate width.
Yes. Viridian and several other master-planned communities in Arlington enforce architectural review standards that cover gate material, color, height, and whether automation is allowed at all on certain lot types. The HOA application has to be filed before installation, with drawings and material samples attached. We prepare the submittal package as part of our quote so the gate you buy actually matches the book the HOA is judging it by. Estimate is free either way.
The most common cause we find is a post footing poured at the standard 30-inch suburban depth that Arlington’s clay then heaved upward and sideways as it dried. The post leans a few degrees, the hinge geometry shifts, and the gate leaf starts dragging at the latch end. The fix is a deeper, belled footing and re-hanging the gate to plumb. If you caught it early, we can often reset the post without replacing the gate itself. Call (817) 510-4183 and we’ll give you a written assessment before touching anything.
Written by Adrian Vance, Owner at Vance Gate Repair in Arlington, serving Arlington gate installation and repair since 2014. Every job under the Haven Standard: written price first, photographic evidence on every visit, and a 365-Day Done Right Promise on all completed work.