Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Irving, TX
Gate access control and gate parts work in Irving skews toward automated, ornamental-iron systems rather than simple residential wood gates, because of the Las Colinas corporate corridor and HOA-gated communities. We repair the gate you already own, whether it’s a FAAC swing operator on a patio home or a Viking slide unit on a commercial entry. Call (817) 510-4183 and a live person answers, any hour.
Why Irving Homes Are Different
Irving sits on Blackland Prairie expansive clay soil. It swells after rain and shrinks in drought, and that movement throws gate posts out of square and heaves footings on an annual cycle. A gate that closes square in March can drag the latch plate by August. North Texas heat over 100°F expands steel frames and binds hardware, and the February 2021 ice storm froze operators and cracked weld joints across the city. Older North Irving and Irving Heights ranch homes often have retrofitted iron gates, while Las Colinas has a dense layer of vehicular-access and swing-gate systems tied to HOA and corporate access control. We carry parts for both worlds on the truck.
Our Main Irving Services
Two service categories cover most of what we fix for Irving homeowners. Here are the three Irving-specific pages that we route from this resource, each explaining the work, the prices, and the local conditions.
Gate Repair in Irving
Gate repair in Irving means diagnosing why a swing or slide gate stopped working, then fixing the specific failed component rather than selling a full replacement. That matters on Las Colinas HOAs with shared gate systems and on North Irving ranch homes with retrofitted iron. We write the price before any work starts, per Haven Standard Clause 1, and we photograph every adjustment before we leave. See the full service breakdown at Gate Repair in Irving.
Gate Installation in Irving
A new gate in Irving has to survive Blackland Prairie soil movement and summers that regularly clear 100°F. We measure the post depth against the clay subsoil, spec the hinge and opener for the gate weight, and write the full scope in advance. Installation is scheduled and measurable, never a same-day rush. See how we plan and price a full install at Gate Installation in Irving.
Gate Motor & Opener in Irving
Most Irving gate operator failures we open up are either limit-switch drift from repeated heat expansion, or control boards that died during an ice event or a power surge. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so you don’t get steered toward replacing a motor we can repair. See the motor service page at Gate Motor & Opener in Irving.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Irving
Gate access control in Irving typically means keypad entry, remote control, phone entry, card readers, or a video intercom on an automated vehicular gate system, and the demand here is concentrated in the Las Colinas corporate corridor and HOA-gated communities rather than in simple residential back gates. Those systems were frequently installed during the 1990s and early-2000s building boom and are now reaching end-of-life together across a few square miles, which produces a wave of control-board and reader replacements we see nowhere else in the Metroplex. When we work on access control, we photograph the board, the wiring terminations, and the final settings, so the next technician can work from what we left instead of guessing. We repair and install the full Gate Access Control line.
Keypad Entry
Signs you need it
Your keypad stops accepting codes, or one code opens the gate but no longer registers for other residents.
What it costs in Irving
Keypad replacement or reprogramming in Irving generally runs $225 to $550 depending on the keypad brand and whether it’s tied to an HOA multi-code system.
How we do it
We test the circuit path from the keypad to the control board, find whether the failure is in the keypad, the wire run, or the board relay, replace the failed part, and then photograph the new code configuration and the wiring.
Phone Entry
Signs you need it
Calls from the entry panel don’t ring through, or visitors report dead air when the system tries to connect.
What it costs in Irving
Phone entry repair or replacement in Irving ranges $350 to $900 depending on whether it’s a cellular or landline-based panel and how much wiring is usable.
How we do it
We check the telephone line or cellular module, trace the relay to the gate opener, and replace the panel or re-terminate the connection, then photograph the wiring and test a live call.
What Gate Access Control Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Keypad repair or replacement | $225 - $550 |
| Phone entry system repair or replacement | $350 - $900 |
| Control board replacement | $400 - $1,200 |
Which access control systems do you work on in Irving?
We work on keypads, phone entry panels, card readers, video intercoms, and remote controls tied to FAAC, BFT, Linear, and Viking operators, among other brands. The operator brand rarely matters as much as the wiring state, which is why we photograph everything before we button the panel up.
Can you work on an HOA gate access system in Irving?
Yes. Many Las Colinas and North Irving HOA systems fall under a shared access-control setup, and we repair the failing component and provide a written record of what was changed. Call (817) 510-4183 and we’ll schedule a look.
Gate Parts & Welding in Irving
Gate parts and welding in Irving means repairing the structural pieces that the clay soil, heat, and ice work against: hinges, posts, rails, and the welds that hold an ornamental iron gate together. North Texas clay heaves post footings annually, and the 2021 freeze cracked weld joints across the city’s older iron gates. We replace the failed part and document every weld and part number on Gate Parts & Welding.
Hinge Replacement
Signs you need it
The gate sags at the latch end, the hinge pin is worn or cracked, or the gate scrapes the post on the close.
What it costs in Irving
Hinge replacement in Irving typically runs $185 to $420 per hinge set, depending on gate weight and whether the post plate needs re-welding.
How we do it
We support the gate, cut or unbolt the failed hinge, weld or bolt the new hinge in place, and then re-square the gate against the post, photographing the new installation.
Post Replacement
Signs you need it
The post leans visibly, the gate no longer latches, or the post base has rusted through at the concrete collar.
What it costs in Irving
Post replacement in Irving usually runs $450 to $1,100 per post depending on depth, soil conditions, and whether concrete removal is needed.
How we do it
We cut the old post at grade, dig to the correct depth for Blackland Prairie soil movement, set the new post in concrete, and re-hang the gate after the concrete cures, photographing the footing depth before backfill.
Custom Welding
Signs you need it
An ornamental iron picket has snapped or a weld joint has cracked, usually after an ice event or a vehicle strike.
What it costs in Irving
Custom welding repairs in Irving range $150 to $600 depending on the joint count, the position overhead or at ground level, and whether the gate has to be removed.
How we do it
We grind the failed joint or picket clean, weld with the correct rod for the existing metal, and photograph the bead before and after, so you can see what was actually joined.
What Gate Parts & Welding Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Hinge replacement | $185 - $420 per set |
| Post replacement | $450 - $1,100 per post |
| Custom welding repair | $150 - $600 |
Can you weld a gate without removing it in Irving?
Often yes. We can weld most ground-level and mid-height joints on site with the gate still hung, assuming the area is safe and clear. Overhead or heavily damaged sections sometimes get removed briefly, but the price is written before any torch lights.
How long does post replacement take in Irving clay soil?
We dig to the right footing depth for Blackland Prairie clay, set the new post in concrete, and give it time to cure before re-hanging the gate. The full job usually takes one day on site with a return for the gate re-hang. Call (817) 510-4183 for a written timeline.
Brands We Service in Irving
We keep common parts for FAAC, BFT, and Linear on Irving jobs, and we service Viking, LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule without steering you to a replacement. Most stocked parts go in same-day. See the full list on our brands.
Pricing for Gate Repair in Irving, TX
| Service | Typical range in Irving |
|---|---|
| Keypad repair or replacement | $225 - $550 |
| Phone entry repair or replacement | $350 - $900 |
| Control board replacement | $400 - $1,200 |
| Hinge replacement | $185 - $420 per set |
| Post replacement | $450 - $1,100 per post |
| Custom welding repair | $150 - $600 |
Labor climbs in Irving when the gate has been out of square long enough to stress multiple hinges, or when a control board failure runs through to a dead operator as well. The price on the written scope is the price you pay; we don’t add a surprise line item after the work is done.
Neighborhoods We Serve in Irving
We run gate repair and access control calls across all of Irving, from the HOA-heavy gated communities around Las Colinas through North Irving, Irving Heights, and the older ranch neighborhoods south of 183. We usually reach most Irving addresses within 60 to 90 minutes for a scheduled call.
- Las Colinas
- North Irving
- Irving Heights
- Valley Ranch
- South Irving
Service Area - Cities Near Irving
We serve gates and access systems just across the Irving line, too. Crews cover automated and ornamental gates in Dallas, TX, Grand Prairie, TX, Carrollton, TX, and Coppell, TX, with the same written-price and photo-record standard on every job.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Irving
We answer the phone live 24/7, and we can usually have a technician at most Irving addresses within 60 to 90 minutes when a gate is stuck open or won’t secure. Call (817) 510-4183, tell us the neighborhood and what the gate is doing, and we’ll give you a straight answer on timing.
That depends on your HOA. Many Las Colinas and Irving communities require approval before replacing a gate or changing an access control panel, while repairs to the existing system often don’t. We can work from your HOA’s written approval, and we document the finished work for any compliance review.
It can. Blackland Prairie clay swells and shrinks on a seasonal cycle, and gates on shallow footings will move with it. Where the post is the problem we dig to a deeper footing and set the post through the shrink-swell zone, which reduces the recurring movement. Call (817) 510-4183 and we’ll tell you what your footing actually is before recommending anything.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.