Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Hurst
A gate motor replacement or opener repair in Hurst typically runs $450-$1,850 depending on the operator type, and most motor swaps are completed in one visit. That’s the number range we quote from, and you’ll get it in writing before any work starts. We dispatch technicians into Hurst daily from our Dallas-Fort Worth office, and we know exactly what your gate is up against: Blackland Prairie clay that heaves, shrinks, and racks gate frames season after season. Call (817) 510-4183 for a free estimate with a written price.
This isn’t generic gate talk. Hurst sits on expansive clay that moves. When the soil under your gate posts shrinks during a July drought, the frame twists, the hinges bind, and the motor strains against geometry it was never designed to fight. We fix that. And we document it.
Why Vance Gate Repair Irving Is Hurst’s Preferred Gate Motor & Opener Company
We’re independently owned and operated, led by Adrian Vance, and we’ve repaired over 22,000 gates since 2014, every one with a written price before the job started and a photo record when the technician left. Hurst homeowners keep our number because we tell them what’s wrong in plain terms, then show them the evidence. Under the Haven Standard, you’re not taking anyone’s word for it.
Our Gate Motor & Opener team works on nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t steer you toward a replacement when a limit-switch adjustment or a new control board fixes the problem. The written price covers the actual repair, not a sales pitch.
Every visit to Hurst leaves you with a documented photo log: what was found, what was adjusted, what was installed. If the repair isn’t right within 365 days, we make it right, no argument, no fee. A live person answers the phone 24 hours a day, seven days a week. No voicemail loop, no callback queue.
Our Gate Motor & Opener Services in Hurst
Hurst’s housing stock is almost entirely built out, mostly 1960s through 1980s ranch-style homes with gates that are now 40 to 60 years old. The work here is chronic, not occasional. Here’s what we handle most often.
Motor Installation
Most motor installations in Hurst are retrofits on gates that were never designed for automation. We set the operator to work with the existing frame or we correct the frame first. A typical swing-gate motor installation in Hurst runs $1,100-$2,400, including new brackets, safety photocells, and the operator itself.
Motor Repair
If your motor hums but the gate doesn’t move, or the gate opens halfway and reverses, you’re usually looking at a failed capacitor, a stripped gear, or a limit switch that’s drifted. Motor repairs in Hurst run $180-$475 for most component-level fixes. We quote the price before we open the housing.
Linear Motor
For slide gates, the linear motor and rack are the workhorses. In Hurst, the rack and pinion bind constantly because the concrete base under the rail shifts with clay heave. We realign the rack, reset the pinion clearance, and adjust the torque settings so the motor isn’t fighting the frame every cycle. Linear motor replacements on a Hurst slide gate run $850-$1,700.
Slide Motor
Wide driveway gates, the kind you see on Hurst’s larger lots off Pipeline Road and along the northern stretches near Colleyville, need slide motors rated for the gate’s weight. We size the operator to the actual gate mass, not a guess. Slide motor service runs $600-$2,200 depending on whether we’re repairing or replacing, and we always check the guide rollers and the rack alignment while we’re there.
Solar Gate Opener
Long driveways in Hurst often end far from house power. Running conduit can cost more than the operator. A solar gate opener with a properly sized panel and battery bank is usually the right answer. We install and service solar-powered operators, and we check the panel angle and battery health before declaring anything failed. More on that below.
Battery Backup
North Texas storms take power out. If your gate operator has no battery backup, your driveway becomes a manual-lugging job in the rain. We retrofit battery backup onto existing motors so the gate keeps working through outages. In Hurst, that’s a $350-$700 addition on most residential operators.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hurst
There’s no “one brand to rule them all” with gate automation, and we won’t pretend otherwise. We service whatever is already on your property. LiftMaster is common on newer Hurst swing gates. FAAC shows up on a lot of hydraulic operators from the early 2000s. Mighty Mule and Ghost Controls appear on DIY installations, often with undersized wiring or missing safety edges. We fix all of it. We stock common control boards, remote receivers, and safety photocells locally for Hurst service calls, which means fewer return trips for parts.
Common Gate Motor & Opener Problems We See in Hurst Homes
- Clay heave racks the gate frame and binds the operator. The Blackland Prairie soil under Hurst swells in wet springs and shrinks in dry summers. The gate posts move. The motor strains. The fix is resetting posts in properly dug footings, not just loosening the hinges.
- Solar panels lose charge from dust and heat. Dry-season dust from the clay soil coats solar panels fast. Combined with 100-degree afternoons, panel efficiency drops enough that the battery never fully charges. A proper cleaning and angle check is part of every solar opener service we do in Hurst.
- Loop detectors fail when the soil shifts. The loop wire embedded in the driveway senses when a car is waiting to exit. When expansive soil shifts that loop wire, the detector stops triggering. The gate sits there while you wait. We diagnose and repair loop faults, including re-cutting and re-setting loops when the driveway has cracked.
- Old post footings and hinge hardware fail together. On Hurst’s 1960s and 1970s ranch homes, the concrete collar around the post cracks at the same time the original lag-bolt hinges shear. Patching one without the other guarantees a callback within one dry season. We reset the post and replace the hardware in one go.
Pricing for Gate Motor & Opener in Hurst, TX
We put numbers in writing. Here’s the honest range for the Hurst market:
- Motor repair: $180-$475
- Motor replacement (swing gate): $1,100-$2,400
- Motor replacement (slide gate): $850-$2,200
- Solar panel and battery service: $150-$600
- Battery backup retrofit: $350-$700
- Full post reset with updated hardware: $800-$1,600 depending on gate size and footing depth
What affects the price: the gate’s weight and width, whether the existing mounting brackets are still sound, whether the post needs resetting, and which brand of operator fits your frame without major modification. The written quote you get from us covers all of it. No surprise invoice at the end. That’s Haven Standard Clause 1: have it in writing. Call (817) 510-4183 and we’ll come out, assess your gate, and hand you a written price before any tool comes off the truck.
The Hurst Gate Motor Problem Nobody Writes About
Here’s what separates Hurst from Bedford, Euless, or Colleyville when it comes to gate motors: the soil. Hurst’s residential lots sit almost entirely on Blackland Prairie expansive clay. In wet springs, that clay swells and pushes post footings upward. In the brutal July-August droughts, it shrinks and the ground literally drops away from the concrete. Your gate frame racks. The hinges twist. The operator binds against a frame that’s no longer square.
This isn’t a one-time fix. It’s a cycle. Every dry season, the gate moves a little more. Every wet season, it settles a little differently. Neighboring cities on sandier soil deal with impact damage and normal wear. In Hurst, the ground itself is the enemy.
We reset a twisted swing gate on a 1970s ranch home off Pipeline Road where the clay heave had cracked the concrete collar and sheared the original lag hinges. We pulled the old posts, dug proper footings, set new steel posts in concrete below the active clay zone, and installed a LiftMaster LA400 operator with new safety photocells. No callback through the following dry season. That’s the fix that lasts in Hurst. A hinge adjustment alone would have failed again by September.
If your gate motor has been repaired once and is acting up again after the next dry spell, the operator probably isn’t the problem. The geometry is. We solve that problem at the source.
We Also Serve Cities Near Hurst
If you’re looking for Gate Motor & Opener in Hurst, we already cover your neighborhood. We also serve Bedford, Colleyville, Euless, and Southlake with the same written pricing and documented repair process. Dispatch is coordinated from our Dallas-Fort Worth office, and crews serving Hurst work locally across the HEB area regularly.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Hurst
Because the Blackland Prairie clay under your gate posts shrinks several inches during drought, pulling the posts out of plumb and racking the gate frame. Every dry season the gate moves a little more, and the motor strains against the misalignment. The lasting fix is resetting the posts in footings dug below the active clay zone, then replacing hinge hardware that’s already been stressed. A motor adjustment alone won’t hold. Call (817) 510-4183 for a written assessment.
Yes. A solar gate opener with a properly sized panel and sealed battery bank handles most residential swing gates at the end of long Hurst driveways. We size the panel to the operator’s draw and the gate’s cycle count, then set the angle for maximum winter sun. Dust from the dry clay soil is the main killer of solar efficiency here, so we include panel cleaning in every solar service. Expect $1,800-$3,200 for a complete solar operator package installed.
For a wide driveway or light farm gate in Hurst, you need a slide-gate operator sized to the actual gate weight, not the manufacturer’s optimistic rating. Most residential slide gates here run 400-800 pounds. We calculate the real mass including wind load, then select an operator from Linear, FAAC, or LiftMaster with enough reserve torque. Undersized operators burn out capacitors and strip gears within two or three summers. We quote the right size the first time.
Keep the operator’s internals clean and check the thermal overload protection. Hurst summers routinely exceed 100 degrees, and metal components expand enough to change clearances inside the motor housing. That expansion is why so many openers stall in August. We clean and inspect the housing, verify cooling vents are clear, and adjust limit switches for thermal drift. Battery systems also need ventilation checks, because heat kills lead-acid batteries faster than age does. A pre-summer service call in May or June prevents most August failures.
Yes, we service older solar openers from LiftMaster, FAAC, and Ghost Controls, plus the others we list above. The usual problems are dust-covered panels, degraded batteries, and controllers that no longer charge properly. We test the panel output under load, check battery voltage and capacity, and clean the array before recommending any replacement parts. If the panel is too small for the gate’s actual duty cycle, we’ll show you the math and give you a written price to correct it.
Get a Written Price for Gate Motor & Opener Work in Hurst
You’ll get a written price before any work starts. You’ll get a photo record of what we found and what we did. And if the repair isn’t right, we’ll make it right within a full year under the 365-Day Done Right Promise. That’s how we’ve handled over 22,000 gates since 2014.
Call (817) 510-4183 now. A live person answers. Tell us what the gate is doing, and we’ll schedule a time to come assess it in Hurst. Free estimate, written quote, no pressure.
Written by Adrian Vance, Owner at Vance Gate Repair Irving, serving Hurst and the surrounding HEB area since 2014.