Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Hurst
Gate installation in Hurst comes down to one thing most companies get wrong: the footing. The Blackland Prairie clay under Hurst expands and contracts so aggressively that a post set at 24 inches will be out of plumb within one wet-dry cycle. We bore footings to 36 inches minimum, sleeve the posts below the clay line, and build a gate that stays square through the July drought and the April rains. If you’re planning a new driveway gate, pedestrian gate, or a double gate across a long Hurst driveway, call (817) 510-4183 and we’ll put the scope and the price in writing before any work starts.
Why Vance Gate Repair Irving Is Hurst’s Preferred Gate Installation Company
Hurst is almost entirely built out. The homes are 1960s-to-1980s ranches on clay, and the gates on those properties were mostly installed with footings that were never deep enough for this soil. We see the same pattern from the neighborhoods off Pipeline Road to the streets south of Highway 183: a gate that worked fine for years, then one dry summer later it’s racked, dragging, and the latch won’t catch. Our crews know that a new gate in Hurst isn’t really about the gate. It’s about what’s under it.
We don’t hand you a verbal estimate and a handshake. Under The Haven Standard, you get a written scope and a written price before anyone picks up a tool, and a photo record of what was found and what was installed when the job is done. The same documentation habit Adrian Vance built in commercial access control starting in 2014 applies to every residential driveway gate we hang in Hurst. A live person answers at (817) 510-4183 any hour, and when a technician is dispatched, you get their name and photo before they arrive.
Scheduling for Hurst is coordinated from our Dallas-Fort Worth office, and crews are dispatched locally. We stock parts for the gate operators we service most often in this area, which means less waiting on a truck from a warehouse when your operator fails in the summer heat. The 365-Day Done Right Promise covers every installation: if it’s not right, we make it right. No argument, no expiration within that window.
Our Gate Installation Services in Hurst
Most of the gate work we do in Hurst falls into a few categories: replacing a failed 40-year-old gate on a ranch home, converting a manual gate to automatic, or rebuilding a gate that the soil has already twisted. Here’s what we cover, with the Hurst-specific details that matter. See our full Gate Installation service page for the complete breakdown of what every install includes.
Driveway Gate Installation
Hurst driveways are wide, and the original gates on most ranch homes were hung on 4×4 posts set shallow in clay. When we install a driveway gate in Hurst, we bore to 36 inches, sleeve the posts, and spec hinges rated for the span and the weather. A 12-foot single swing or a 16-foot double swing both work on most Hurst lots, but the operator sizing matters more than most people expect. We’ll match the motor to the gate’s weight and duty cycle before we quote a price.
Double Gate Installation
Double gates are the most common install we do on Hurst acreage lots and long side-yard driveways. The failure most people see is one leaf sagging while the other stays square. That’s almost always a footing problem on one post, not a hinge problem. We set both posts at the same depth, sleeve them in concrete below the clay line, and use a center drop rod so the closed gate carries its weight on the ground instead of on the hinges.
Pedestrian Gate Installation
A pedestrian gate on a Hurst yard usually has a simpler job than a driveway gate, but it sits in the same clay. We set corner posts the same way we set driveway posts: deep, sleeved, and backfilled with drainage. If you want a keypad or latch that ties into your existing fence, we’ll build it into the written scope so there’s no surprise line item at the end.
Sliding Gate Installation
Sliding gates work well on Hurst properties where the driveway slopes toward the street or where a swing gate would block the sidewalk. The track and the roller carrier take the daily load, so the concrete pad under the track has to be leveled and cured before we mount the gate frame. On a long Hurst driveway with a heavy steel gate, we’ll usually spec a cantilever slide so there’s no ground track to fill with clay and gravel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hurst
We install and service nine gate-automation brands, so we’re not going to tell you the motor you already have is obsolete just to sell a replacement. In Hurst we’re regularly working on LiftMaster, FAAC, Elite, and Mighty Mule operators, plus the rest of the line. If you’ve got a working operator and you need a new gate hung under it, we’ll match the new hardware to what’s already there. If the operator is what failed, we’ll quote a replacement in writing and you’ll see the part number before we install it.
Common Gate Installation Problems We See in Hurst Homes
- Post heave from shallow footings. A post set 24 inches down in Blackland clay heaves within one hot, dry summer. The gate racks, the latch side drags, and the whole frame starts working against the hinges. A 36-inch footing with the post sleeved below the clay line is the fix.
- Undersized operators on wide driveway gates. A lightweight residential opener on a 16-foot double gate fails early, especially when the gate faces July heat and the metal expands enough to bind. We size the operator for the gate’s measured weight and the duty cycle it’ll actually see.
- Mains power where it doesn’t belong. A gate near the street with a 300-foot trench to the panel can mean voltage drop, breaker trips, and a burned control board. On longer Hurst driveways, a solar operator with battery backup is often the more reliable choice and reduces install cost by eliminating the trench.
- Residential hinges on heavy gates. A wide steel gate on hardware-store hinges fails at the weld within a year under daily traffic. We use commercial-grade hinge hardware rated for the leaf weight, and we photograph every mounting point before we leave.
Pricing for Gate Installation in Hurst, TX
Gate installation prices in Hurst track the size of the gate and the condition of the ground. A single pedestrian gate with standard hardware typically runs $450-$900. A 12-foot driveway swing gate with post sleeves and hinges runs $1,800-$3,200 depending on material. A 16-foot double driveway gate, fully hung with the posts set at 36 inches, runs $3,500-$6,000. Adding an automatic operator is typically $1,400-$2,800 on top, and solar power adds $600-$1,200 over a mains install when the driveway is too long to trench economically. Every quote is written and handed to you before work begins, and the price is the price. No surprise invoice at the end.
Call (817) 510-4183 for a free estimate on gate installation in Hurst. We’ll come out, look at the soil and the existing posts, and give you a number in writing.
We Also Serve Cities Near Hurst
If you’re in Bedford, Colleyville, Euless, or Southlake, we can handle your gate installation there too. The soil conditions change a bit as you move west, and our crews know what that means for footing depth and operator sizing. See our Gate Installation in Hurst page for details on our local approach, or call (817) 510-4183 and we’ll come take a look.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Hurst
Because Hurst sits on Blackland Prairie expansive clay, which swells in wet springs and shrinks in dry summers with more force than the looser, sandier soils you find in parts of Fort Worth. A post set at 24 inches in Hurst clay will heave out of plumb within one dry season. We bore to 36 inches and sleeve the posts below the clay line so the gate stays square year-round. Call (817) 510-4183 if you’re planning an install and want the footing spec in writing.
Yes, and on long Hurst driveways it’s often the better option. A solar panel paired with a battery-backed operator like a LiftMaster LA500 or a FAAC unit avoids trenching hundreds of feet, which is usually more expensive than the solar kit itself. We size the panel and battery to the gate’s duty cycle and our North Texas sunlight, and the whole thing appears in the written quote before we start. Call (817) 510-4183 and we’ll tell you exactly what fits your setup.
Usually not. On Hurst’s clay soil, a gate that sags within months is almost always a post that was set too shallow and has already started to heave. The frame then works against the hinges until they shear. We see this constantly in the 1960s-to-1980s neighborhoods off Pipeline Road and across the older subdivisions. The fix is a full post reset at 36 inches with the post sleeved, plus hinge hardware rated for the actual leaf weight. We’ll document what we find with photos before and after. Call (817) 510-4183 for a free estimate.
Automatic gates installed in Hurst must comply with UL 325 entrapment standards, which means photo-eyes, contact edges, and proper audible or visual warning where required. A sliding gate needs two photo-eyes covering the full travel path and contact edges on the leading and trailing edges if the gate can trap a person or vehicle. We build this protection into every automatic gate installation quote in writing, and we photograph the final setup. Call (817) 510-4183 to discuss your sliding gate.
Measure the gate’s actual weight, not just its width. A 16-foot steel tube gate with welded panels can weigh over 600 pounds, and that’s before wind load in a North Texas storm. For a Hurst acreage gate that sees daily trailer traffic, we spec a commercial-grade operator with a high duty cycle and a 1/2 HP motor minimum, plus a solar option if utility power isn’t within a reasonable trenching distance. We’ll weigh and measure the gate during the estimate and give you the operator spec in writing. Call (817) 510-4183 and we’ll come out.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Hurst since 2014.