Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Colleyville
Most gate motor failures in Colleyville follow a pattern we can usually diagnose over the phone. The operator trips its thermal overload, the leaf binds against the pillar, or the remote stops triggering the board. A typical swing-gate motor repair in Colleyville runs $280-$620, and a full operator replacement on a custom wrought-iron estate gate runs $1,400-$3,200 depending on brand and whether the arm brackets need fabrication. We dispatch to Colleyville daily. Call (817) 510-4183 and a live person answers, any hour.
Colleyville’s gate stock is different from what you see in Bedford or Hurst. We’ll get into that below, with the prices, the failure modes, and what we document on every visit. If you just need a number, call. If you want to understand what’s actually wrong before anyone touches the gate, keep reading.
Why Vance Gate Repair Irving Is Colleyville’s Preferred Gate Motor & Opener Company
Adrian Vance started this company in 2014 out of commercial access-control work. That background matters in Colleyville more than anywhere else we serve. The gates here aren’t builder-grade. They’re custom ornamental iron hung on masonry columns set into Blackland Prairie clay, and they fail in ways a residential gate-only shop never sees. We carry the documentation habit from commercial sites: every visit leaves you with a written price before work starts, and a photo log of every adjustment and part number when we leave. That’s The Haven Standard, and it applies to every job in Colleyville.
Our Gate Motor & Opener team reviews the failure history on your specific operator before dispatch, so the technician arrives knowing what brand is on the property and what parts are likely needed. Colleyville customers routinely mention that the written quote matched the final invoice. That’s not accidental. That’s Clause 1 of The Haven Standard: have it in writing, before any work begins.
We serve Colleyville from the brand’s Dallas-Fort Worth office, with crews that know the streets here: Montclair Parc, the drives off Pleasant Run Road, the estates along Bransford Road and Glade Road. Response time to most Colleyville addresses is same-day for motor repairs, with no after-hours upcharge for emergency calls. A live person answers the phone 24/7.
Our Gate Motor & Opener Services in Colleyville
Motor Installation
A full operator installation on a Colleyville estate gate runs $1,600-$3,800, including the motor, new brackets, safety edge or photo-eye wiring, and loop detector integration. On custom gates with ornamental pickets, the bracket work often requires fabrication so the motor arm doesn’t interrupt the ironwork pattern. We quote that fabrication in writing before any cutting happens. Installation is measured and scheduled, not same-day. We survey the post condition first, because on this soil, a new motor bolted to a heaving post is a motor that fails early.
Motor Repair
Motor repair is the core of our call volume in Colleyville. Most operators installed during the 15-25 year estate-home boom are reaching end-of-life on their control boards, limit switches, or drive gears at roughly the same time. A control board replacement on a FAAC or LiftMaster typically runs $320-$680. A limit switch adjustment or replacement runs $140-$260. We stock boards and gears for all nine brands we service, which means many repairs are completed on the first visit.
Linear Motor Service
Linear arm motors see heavy use on Colleyville’s long private driveways where swing gates replaced slide gates during the 1990s. These arms are sensitive to post drift. When clay heave shifts the hinge post even half an inch, the linear arm has to push harder, the current draw climbs, and the thermal overload trips. We measure the post position on every repair visit and photograph the reading. A linear motor replacement in Colleyville runs $700-$1,500 installed, including torque adjustment for the specific gate weight.
Slide Motor Service
Slide gates are less common in Colleyville than swing gates, but they appear on wider driveways and some commercial-adjacent properties. The failure profile here is different: rack and pinion wear, ice seizure in winter, and v-track misalignment from soil movement along the run. A slide motor replacement runs $900-$2,200 depending on horsepower and whether the rack needs replacement. The embedded loop detector is part of the system we always test, because a mis-set loop is the most common cause of a slide gate that reverses mid-travel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Colleyville
We work on whatever motor is already on the property. That’s the difference between a repair company and a replacement sales team. In Colleyville we routinely service FAAC, BFT, Linear, and Viking operators, among others. The pre-2010 FAAC and BFT hydraulic units on many Colleyville estates are worth repairing if the reservoir and seals are intact, and we carry the common board and solenoid replacements on the truck so we’re not driving back and forth across the metro while your gate sits open. No brand exclusivity. We tell you whether repair or replacement is the better money spent.
Common Gate Motor & Opener Problems We See in Colleyville Homes
- Clay heave binding on swing gates: Colleyville sits on expansive Blackland Prairie clay that swells in spring and shrinks in summer drought. That movement shifts hinge posts and masonry columns, binding the leaf and overloading the operator. We see this every May, almost without exception.
- Ice storm damage to underground operators: Winter ice events crack hydraulic reservoirs on underground gate operators and seize exposed gear racks on slide gates. If a freeze is forecast, we advise running the gate through a cycle before the temperature drops below 30°F. If it’s already seized, don’t force it; call us.
- Thermal overload trips from worn drive gears on estate gates: The 20-year-old motors on Colleyville’s 1990s-era custom gates are reaching wear-out on drive gears and capacitor circuits. The motor still runs, but it trips mid-travel or sounds labored. This is repairable if caught before the board cooks.
- HOA-mandated custom hardware mismatches: Several Colleyville HOAs require gates and pillars to match the original ironwork profile. When a standard motor bracket or picket doesn’t match, we fabricate a matching bracket or finial before installing. That’s normal here. In Hurst or Bedford, nobody ever asks for that.
Pricing for Gate Motor & Opener in Colleyville, TX
A typical motor repair call in Colleyville lands between $180 and $620, depending on whether it’s a limit switch adjustment or a full control board replacement. Linear motor replacements run $700-$1,500. Slide motor replacements run $900-$2,200. A full swing-gate operator installation on a custom estate gate runs $1,400-$3,200, with the high end reflecting fabricated brackets and matched ironwork. The written price is handed to you before any work begins, and it doesn’t change unless you approve additional scope in writing. That’s the entire point.
Estimates are free. We survey the gate, measure the post drift, record the current operator’s brand and board number, and give you a printed number. You decide.
We Also Serve Cities Near Colleyville
Our same Colleyville crew covers Bedford, Euless, Southlake, and Hurst. If you’re a few minutes down 121 from our Colleyville stops, we’ll route you in without a separate trip charge.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Colleyville
It’s the clay. Colleyville’s Blackland Prairie clay expands sharply with spring rain, heaving the hinge posts and masonry columns outward or inward. Even a half-inch of post movement changes the leaf geometry enough to bind the gate against the pillar and overload the operator. A motor service won’t fix it because the motor isn’t the problem; the soil is. A more cost-effective service job would have a concrete post. We measure post drift on every call and record the number, so you can see the movement year over year. Call (817) 510-4183 and we’ll give you the reading.
Several established Colleyville neighborhoods and HOAs have aesthetic covenants requiring new gate hardware, pickets, and finials to match the original custom ironwork profile. Enforcement varies, but we treat every operator repair on an ornamental gate as a custom-match job by default. That means if a standard bracket won’t clear a scroll pattern or a finial doesn’t match the existing profile, we fabricate a replacement instead. It keeps the repair in compliance and preserves the original look.
Freezing conditions crack hydraulic fluid reservoirs on underground operators and seize exposed gear racks on slide gates, leaving the gate either locked in place or bypassing safety sensors. If the gate won’t move after a freeze, forcing it with the remote can damage the pump. We recommend a service call to thaw and inspect the reservoir, replacing the fluid and seals before pressure testing. We also offer battery backup systems that keep the gate operating through power outages tied to ice events.
If the motor still runs and trips a thermal overload, repair is usually worth it. A board replacement or limit switch reset on a LiftMaster swing gate operator often costs $300-$650, which is less than a full replacement at $1,400-$2,200. We’ll give you the part number, the current draw reading, and the photo record before recommending anything. If the board is burned, the gearbox is grinding, and the motor is original to a 2005 installation, replacement starts making better financial sense. We’ll show you the numbers either way.
Every automatic gate in Colleyville must have functioning entrapment protection: photo-eyes, safety edges, or an equivalent like a monitored loop detector, depending on the gate type and travel. If the safety edge is cracked, the photo-eye is misaligned, or the loop detector is not reversing the gate when a vehicle crosses, that’s a code and safety issue we address before finishing any motor repair. We test it, photograph the setting, and document the result on every visit.
If your Colleyville gate motor is acting up, call (817) 510-4183. We’ll answer, walk through what you’re seeing, and give you a written price before anyone touches the gate. Free estimates, photo records on every job, and the 365-Day Done Right Promise backing the work.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Colleyville since 2014.