Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Access Control for Irving Homeowners
Gate access control in Irving means giving your family and visitors a way in while keeping everyone else out, and it usually comes down to one of six systems: keypad entry, remote control, phone entry, card reader, video intercom, or a smart access app. Vance Gate Repair has worked on these systems since 2014, when Adrian Vance started applying the documentation habits he learned on commercial access-control sites to residential driveways across Irving. We’ve repaired and installed access control on gates in Valley Ranch, Las Colinas, and the neighborhoods around MacArthur Boulevard, and we carry parts and programming tools for the brands already sitting on most Irving properties. When a keypad stops accepting codes or a phone entry unit stops ringing your cell, we answer the phone live and can dispatch a technician to Irving the same day. Call (817) 510-4183 and you’ll speak to a person, not a voicemail tree.
What Our Gate Access Control Service Includes
Access control is the layer between the gate motor and the person asking to come through. Every Gate Access Control in Irving job we take includes the same baseline: we name the equipment on site, test what the system is doing now, quote you a written price for any repair or upgrade before work starts, and leave a photographed record of what we changed. Here’s how that plays out for each type of system.
Keypad Entry
A keypad lets someone enter a numeric code to open the gate. You need it when multiple people come and go daily (landscapers, housecleaners, teenagers) and you don’t want to hand out remote controls. Vance Gate Repair installs, programs, and repairs wired and wireless keypads in Irving, including weather-exposed units that corrode or stop registering key presses after a few Texas storms. If a keypad is dead, we test line voltage at the terminal before replacing anything, because the fault is often in the wiring behind the keypad, not the keypad itself.
Remote Control
A remote control sends a radio signal to a receiver inside the gate opener. You need it for everyday convenience when you’re pulling in from the street and don’t want to roll down a window. We program new remotes to existing receivers, replace failed receivers, and diagnose range problems caused by interference or antenna damage, which we see regularly in Irving neighborhoods with dense construction or overhead power lines near the gate.
Phone Entry
A phone entry system, sometimes called a telephone entry, lets a visitor press a button at the gate and have the system call your cell or landline; you press a digit to open the gate. You need it when you have deliveries, guests, or contractors showing up when you’re not home. We install and service phone entry units that use cellular or VoIP calling, and on service calls we document the wiring between the telephone entry board and the gate operator’s open terminals so future troubleshooting doesn’t start from zero.
Card Reader
A card reader lets you tap or swipe a proximity card or fob to open the gate. You need it if you have many authorized users and want to revoke access by deleting a card rather than changing a code everyone shares. We install readers, provide cards and fobs, and program card numbers into access controllers; if a reader stops reading, we check for voltage drop and ground faults before replacing hardware.
Video Intercom
A video intercom shows you who is at the gate on a monitor or your phone before you open it. You need it when security matters more than raw convenience, since you can see the person and the vehicle before deciding. We run the camera wiring, set up the indoor monitor or app, and configure the relay that sends the open command to the gate operator. Photographic evidence of the camera’s field of view is part of the record we leave.
Smart Access
Smart access means controlling the gate from a smartphone app, usually through a Wi-Fi or cellular bridge that connects to your existing gate opener. You need it when you want to open from anywhere, schedule recurring access, or see a history of when the gate was opened. We install smart access modules that work with the opener you already have, tie them to your app, and leave a written record of the network settings and the access-control wiring so any future change is documented.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Access Control
We service FAAC access control boards and keypads regularly, including programming new codes and diagnosing boards that won’t retain settings after a power flicker. FAAC’s residential phone entry and radio receiver modules are common on Irving gates, and we stock the wiring harnesses and connectors these units use.
On the Linear side, we work on their telephone entry systems and their MegaCode and Multi-Code receiver families. Linear’s receiver modules show up on thousands of Texas driveway gates, and most of the time the issue is a lost remote code or a corroded antenna connection rather than a dead board. We also work on BFT access control modules, which are popular on newer European-built operators, and on Viking telephone entry units, including their cellular and IP-based door and gate entry products. Whatever make is on your Irving gate, we can test it, quote it in writing, and repair it without steering you toward a replacement you don’t need.
BeforeAfterSigns You Need Gate Access Control Right Now
- The keypad lights up, but the gate doesn’t move. The keypad is sending a signal or at least powering on, but the open command isn’t reaching the opener, which usually means a broken wire, a corroded terminal, or a relay that failed. It’s worth addressing quickly because the next person to try the code (a sitter, a delivery driver, a repair tech) will be locked out.
- You’re sharing one remote control between three cars. Every time the remote leaves the house in someone’s bag, the person at home loses gate access. A keypad or phone entry unit eliminates that single point of failure.
- Visitors are honking or calling you to open the gate because they can’t reach the intercom. If your gate is set back from the street or the intercom is mounted on the wrong side of the approach, people simply won’t find the button. Repositioning the call station or adding a phone entry unit solves this permanently.
- You’ve given the gate code to a contractor, a neighbor, or a previous tenant, and you can’t take it back. Codes spread. Card readers and smart access systems let you revoke access per person without changing a code everyone else uses.
- The gate is manually propped open because access control failed, and now it’s just an open driveway. A gate that’s stuck open because the access system is down is no longer a gate. That’s a security problem and a call we treat as urgent in Irving.
Our Gate Access Control Process - Step by Step
- 1
We answer and schedule directly. When you call (817) 510-4183, a live person answers. We ask what the gate is doing, what equipment is on it, and when you’re available in Irving, then we give you the technician’s name and photo before arrival.
- 2
We inspect and document what we find. The technician tests voltages at the access control board, traces the wiring between the keypad or reader and the opener, and photographs the existing configuration before touching anything. This record is part of the Haven Standard and gets left with you at the end.
- 3
We quote a written price before starting. You get a flat price for the repair, installation, or programming work in writing before we pick up a tool. If the job changes scope mid-repair, we stop and re-quote. There is no surprise invoice at the end, per Haven Standard Clause 1.
- 4
We complete the work and test it end to end. We make the repair or installation, program the codes or cards, and test every function: keypad entry, remote signal, phone ring, card read, camera feed, app command. You watch the test if you want.
- 5
We leave the record and stand behind the work. Before we leave, you receive the photographed documentation and a written note of what was installed, programmed, or adjusted. Every completed access control job is covered by the 365-Day Done Right Promise: if it’s not right, we make it right within one year, no argument and no fee.
How Much Does Gate Access Control Cost in Irving?
A keypad replacement in Irving typically runs between $285 and $520, depending on whether the keypad is wireless or hardwired and whether the existing wiring is intact. Adding a phone entry system for a residential gate usually falls between $1,100 and $2,400, including the unit, mounting, wiring to the opener, and programming. A smart access add-on (a Wi-Fi or cellular module that ties into your existing opener) generally costs $450 to $950 installed. A video intercom with a camera at the gate and an indoor monitor or phone app typically runs $1,400 to $3,200 depending on whether we’re running wire for the first time or using an existing conduit. These are the Gate Access Control pricing figures we quote in writing before any work starts, so you won’t find an unexplained labor line at the end. The free estimate always includes the diagnostic time, the written scope, and the photo record.
What affects Gate Access Control - Dallas area pricing in Irving: the distance from the gate to the house (which drives wire length), whether conduit already exists under the driveway, the brand of the existing opener, and whether you want integration with a home automation system. To avoid overpaying, ask any gate company to put their price in writing before work begins and to show you what they found. We also offer a free second opinion on any written estimate from another company: bring the paperwork and we’ll review it at no cost.
Gate Access Control Near Irving - Our Service Area
We serve Irving and the surrounding cities including Gate Access Control in Euless, Gate Access Control in Coppell, Grapevine, Bedford, Carrollton, Colleyville, Southlake, Hurst, Grand Prairie, Dallas, and Arlington. Typical response in Irving is same-day for access control failures, and we’ll tell you the technician’s ETA when you call. When you’re comparing gate companies across cities, ask what documentation they leave behind, because that’s the difference between paying once and paying twice to rediscover the same problem. For our broader gate services, see our home page.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Access Control in Irving
Gate access control is the system that decides who can open your gate and how: a keypad, remote control, phone entry unit, card reader, video intercom, or smart access app. In Gate Access Control in Grand Prairie and Irving, most residential gates combine one or two of these with an automatic gate opener. The access control system sends an open command to the opener when a valid code, card, phone call, or app command comes through.
Most access control installations take between 2 and 5 hours, depending on how far wiring needs to run and whether conduit already exists under the driveway. A simple keypad add-on might take an hour, while a full video intercom with underground wiring can take most of a day. We quote the time window in writing before we start.
Cost depends on the type of system and existing wiring. Expect $285 to $520 for a keypad replacement, $1,100 to $2,400 for phone entry, $450 to $950 for smart access, and $1,400 to $3,200 for video intercom. Every quote we give is written and flat, before any work starts. Call (817) 510-4183 for an exact quote, estimates are free.
Yes, we service FAAC access control boards, keypads, and phone entry modules in Irving. We’ve worked on FAAC systems across hundreds of gates in Texas since 2014, and we keep the wiring harnesses and connectors those units use on hand. Most FAAC access control failures we see are board resets after power events or relay corrosion at the terminal strip.
When a gate won’t open or won’t close and the access control system is down, we respond same-day in Irving. Call (817) 510-4183 and a live person will give you a definite arrival window, the technician’s name, and a photo before dispatch. If the gate is stuck open and the access system is dead, that’s a security risk, not a scheduling issue.
Every completed access control job is covered by the 365-Day Done Right Promise. If the repair or installation is not right within one year, we make it right at no additional charge. This applies to parts, programming, and workmanship, and there’s no expiration within that 365-day window.
Before the technician arrives, clear the area around the gate keypad and the opener housing, and write down any codes, card numbers, or app logins you use so we can test access after the work. If the system uses an app, have the login ready. No other preparation is needed, and we’ll document everything we find before making changes.
Schedule Your Gate Access Control Service in Irving Today
Call (817) 510-4183 now for a free, no-obligation estimate on gate access control in Irving. We answer live around the clock, give you a written price before any work begins, and leave a photographed record on every visit, so you’ll never pay twice to rediscover the same problem. The technician’s name and photo come to you before arrival, and every job is covered by the 365-Day Done Right Promise. One call gets you a real person and a real plan.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Irving since 2014.