Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWeld & Rust Repair in Irving, TX
Weld and rust repair for residential gates in Irving, TX typically costs between $180 and $450, depending on the severity of the corrosion and whether structural reinforcement is required. At Vance Gate Repair, we provide a written scope and price before any work begins, ensuring you understand exactly what is being repaired and why. If your gate is dragging, sagging, or showing signs of structural decay, our Gate Realignment experts can help-call (817) 510-4183 to schedule a technician. We serve all of Irving with a focus on restoring functionality and safety to your access point.
Rust is more than a cosmetic issue for gates in Irving. Because of our local climate, which features high humidity and significant temperature shifts, oxidation happens quickly once protective coatings fail. When structural welds break or hinges rust through, the gate loses its alignment. This puts immense strain on motors from brands like FAAC, Viking, and BFT. Our goal is to stop the spread of corrosion and reinforce the metal before the gate fails entirely.
When You Need Weld & Rust Repair
You should inspect your gate for rust and weld failure at least twice a year. If you notice any of these symptoms, Automatic Gate Repair may be required to prevent further damage to the automation system:
- Visible Flaking or Pitting: If the metal on your gate frame or hinge plates is flaking, it has likely lost its structural thickness. We often see this in older properties throughout Las Colinas and Valley Ranch where moisture traps between the gate and the brick columns.
- Dragging or Scraping: If your gate scrapes against the driveway, a weld on the hinge assembly or the bottom rail may have snapped. This is a mechanical failure, not just a cosmetic one.
- Loose Hinges or Brackets: If you can see movement in the hinge mounting plate when the gate moves, the weld has likely broken. This is a serious security risk, as the gate could potentially fall or be easily bypassed.
- Automation Errors: A gate that binds due to rust forces the motor to work harder. If your system is throwing error codes or stopping mid-cycle, it may be due to the increased friction caused by a misaligned or rusted gate frame.
- Visible Cracks at Joints: Inspect the intersections where the vertical and horizontal bars meet. Hairline cracks in the paint or coating often indicate a broken weld underneath that is flexing under the gate’s weight.
Safety is our priority. Welding involves high-temperature equipment, intense UV light, and the risk of sparks that can damage nearby landscaping or vehicles. We are fully insured and our technicians are trained to manage these hazards safely on-site. Do not attempt to repair structural welds with DIY equipment, as a failed repair on a heavy gate can lead to injury or property damage.
Our Weld & Rust Repair Process
We operate under the Haven Standard, which dictates that every job includes a documented photo record. This ensures that you, the homeowner, know exactly what was done to your property. We don’t guess, and we don’t leave you with a mystery repair.
- Inspection and Documentation: Upon arrival, we inspect the entire gate structure. We document the current state of the rust and the specific location of failed welds with photographs. This becomes part of your permanent file, which we leave with you.
- Surface Preparation: We grind away the existing rust and degraded paint to reach bare, clean metal. Without this step, any new weld will be weak and prone to immediate failure.
- Structural Welding: We apply high-strength welds to reinforce the compromised joints. If a hinge plate has pulled away, we weld it back to the frame, ensuring it is square and plumb.
- Corrosion Protection: After welding, we clean the area and apply a protective, rust-inhibiting primer and finish paint to match your gate, sealing the metal against Irving’s humidity.
- Testing and Verification: We cycle the gate multiple times to ensure the alignment is correct and the motor is operating without strain. We provide you with a final photo log showing the repair, fulfilling Clause 4 of the Haven Standard.
BeforeAfterWeld & Rust Repair Pricing in Irving
We provide upfront, written pricing before any work starts. Because every gate is unique, we do not use flat-rate “menu” pricing that ignores the specific needs of your property. However, most standard weld and rust repairs fall into these ranges:
| Service Item | Estimated Price Range |
|---|---|
| Minor Spot Weld (Single Joint) | $180 – $280 |
| Hinge Plate Reinforcement | $250 – $400 |
| Major Structural Repair (Bottom Rail) | $350 – $600+ |
| Full Inspection and Minor Touch-up | $150 – $200 |
If you have an estimate from another company, we offer a free second opinion. Bring the paperwork to our technician, and we will review the scope of work at no charge. We believe in transparency, which is why we provide a written price before we pick up a tool. Call (817) 510-4183 to schedule your free estimate.
FAQs - Weld & Rust Repair
Does rust weaken the structural integrity of my gate?
Yes, rust is an electrochemical process that consumes the metal, effectively reducing its thickness and strength. In Irving, we often see older gates where the bottom rail has rusted from the inside out, making the gate heavy and unstable. If you notice deep pitting or flaking, it is time to have a professional evaluate whether the gate can be reinforced with Electric Gate Repair techniques or if it requires replacement. Call (817) 510-4183 for an assessment.
Can you weld on-site at my home?
Yes, our technicians are equipped to perform professional-grade welding on-site. We bring all necessary equipment to grind, weld, and prime the metal in a single visit. Because we follow the Haven Standard, you receive a full photo record of the repair before we leave. This ensures you know exactly what was done to your gate’s structure.
How long does a weld repair last?
A properly executed weld, when cleaned to bare metal and sealed with high-quality, weather-resistant paint, should last for years. We back our workmanship with the 365-Day Done Right Promise. If the repair is not right, we make it right at no additional charge to you. This applies to all our welding and rust mitigation services.
Is it cheaper to repair or replace the gate?
In many cases, spot welding and rust repair are significantly more cost-effective than replacing the entire gate. We only recommend replacement if the structural damage is so widespread that welding would be unsafe or ineffective. We provide a written quote for repair so you can make an informed decision before we begin. If you are unsure, call (817) 510-4183 and we will provide an honest assessment.
Every gate we touch is treated with the same documentation standards we developed in commercial access control. Whether you have a simple residential swing gate or a complex commercial entry, you deserve to know exactly what is happening with your equipment. We provide a written price, a documented photo record, and a 365-day guarantee on every completed repair. If your gate is showing signs of age, call (817) 510-4183 today to speak with a professional about our Gate Repair services at Vance Gate Repair Irving.
Written by Adrian Vance, Owner at Vance Gate Repair Irving, serving Irving.