Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Irving?
Gate parts and welding repairs in Irving generally range from $250 to $850, depending on the complexity of the damage, the specific brand of automation equipment involved, and the extent of the metal fabrication required. Most standard repairs, such as re-welding a broken hinge, adjusting a loose gate arm, or replacing a malfunctioning logic board, fall toward the lower end of this spectrum, while full-scale structural welding or complete operator component replacement sits at the higher end. We provide a written price for every job before any work begins, ensuring you know the exact cost before we pick up a tool.
If you are dealing with a gate that is sagging, failing to latch, or refusing to open, call us at (817) 510-4183. We offer free estimates and stand behind our work with our 365-Day Done Right Promise.
Gate Parts & Welding Cost Breakdown (2026)
Pricing for gate services in the Irving market is driven by labor time, the cost of specialized parts, and the complexity of the existing installation. At Vance Gate Repair, we believe in transparency. Under The Haven Standard, we provide a written scope and price before any labor starts. The following table outlines typical cost ranges for common gate repairs in our service area.
| Service Type | Estimated Price Range |
|---|---|
| Basic Hinge Re-weld (Per Hinge) | $250 – $400 |
| Gate Operator Logic Board Replacement | $450 – $850 |
| Photo-Eye (Safety Sensor) Alignment or Replacement | $200 – $350 |
| Gate Arm Bracket Repair (Welding/Fabrication) | $300 – $550 |
| Limit Switch Adjustment or Replacement | $250 – $400 |
| Driveway Gate Post Straightening (Structural) | $500 – $950+ |
These figures reflect standard residential and light commercial jobs in Irving. Complex structural issues, such as those caused by soil movement in areas with heavy clay content, may require additional site evaluation. We arrive prepared to document everything we find, providing you with a photo record of the issue and the fix.
What Affects Gate Parts & Welding Pricing in Irving
Several factors influence the final cost of your gate repair. When we arrive on-site, we evaluate these variables to provide an accurate, written quote.
- The Automation Brand: We service nine major brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Some brands have proprietary parts that are more expensive to source or require specific calibration tools, which can impact the final price.
- Accessibility of the Gate: If your gate is located on a slope or in a tight alleyway, the labor time required to safely stabilize the gate for welding or repair increases. We factor this into our initial estimate.
- The Extent of Structural Damage: A small crack in a weld is a quick fix. A gate that has torn away from its mounting post due to years of wind stress or foundation shifting requires more intensive metal fabrication and structural reinforcement.
- Safety Requirements: If your gate system is missing modern safety features like photo-eyes or edge sensors, we may recommend installing them to bring the system up to current standards. This adds to the cost but significantly improves the safety of the unit.
- The Need for Custom Fabrication: Sometimes, replacement parts for older gates are no longer manufactured. In these cases, we perform custom metal fabrication to create a matching part, which requires more skilled labor than a simple swap-out.
BeforeAfterCommon Gate Repair Scenarios in Irving
Irving experiences specific environmental challenges that affect residential gates. The soil composition, which often includes expansive clay, can cause gate posts to shift over time. When those posts shift even a fraction of an inch, the gate geometry changes. This puts immense stress on the hinges and the operator arm.
We often see gates in neighborhoods like Las Colinas or established parts of North Irving where the iron has developed fatigue cracks. A common issue is a hinge that has broken its weld. If you ignore a popping sound when the gate opens or closes, you are likely hearing a weld that is beginning to fail. We recommend having us look at this immediately. A hinge that breaks completely can cause the gate to fall, which is a significant safety hazard.
Another frequent repair involves the “travel limits” on the motor. We often find that a gate is hitting the stop too hard or not closing all the way. This is usually a simple calibration of the limit switches, but if left unaddressed, the motor will eventually burn out from the strain. We check these settings on every visit. Under Clause 4 of The Haven Standard, we provide a documented photo record of every adjustment we make, so you know exactly what was done to your system.
How We Handle Welding & Fabrication
Welding is not just about melting metal together. It is about structural integrity. When we perform a weld on a residential driveway gate, we treat it with the same precision Adrian Vance developed during his years in commercial access control.
First, we clean the area. A weld on a dirty or painted surface is a weak weld. We grind the metal down to the raw steel to ensure a clean bond. Second, we use the appropriate welding rod or wire for the thickness and type of metal on your gate. This prevents the metal from becoming brittle. Finally, we paint or seal the weld to prevent rust. Irving weather brings significant humidity and heat fluctuations, and an unsealed weld will begin to corrode within months. We ensure our repairs are built to last.
If you have a gate that requires structural repair, we do not guess at the solution. We assess the load, check the alignment, and provide a written price before we start. This is the core of our business: no surprises, no hidden fees, just documented, professional work.
Safety and Professional Expertise
Working on gate systems, especially those involving heavy iron or high-tension springs, is dangerous. We strongly advise against attempting these repairs yourself.
Gate operators often contain high-voltage wiring, and the motors themselves have enough torque to cause severe injury if they engage unexpectedly. Furthermore, welding requires specialized equipment and safety gear to prevent eye damage from UV light and respiratory issues from metal fumes. Our technicians are trained in these safety protocols and carry the right equipment to manage these risks.
If your gate is acting up, the safest path is to have a professional evaluate the system. Do not force the gate manually if it is resisting, as this can damage the internal gears of the motor, turning a simple adjustment into a much more expensive repair. Call us at (817) 510-4183, and we will come out to assess the situation.
The Haven Standard: Our Promise to You
When you hire Vance Gate Repair, you are not just getting a technician. You are getting the Haven Standard. This is the philosophy Adrian Vance built this company on in 2014.
Clause 1: Have it in writing. We do not give vague verbal estimates. Every job, whether it is a simple weld or a complex motor replacement, comes with a written price before we turn a single screw.
Clause 4: Evidence on every job. We believe you should know exactly what you are paying for. When we finish a repair, we leave you with a photo log of the work. You will see the before and after, the wiring diagrams, and the limit switch settings we adjusted.
The 365-Day Done Right Promise: We stand behind our work. If we fix it, it stays fixed. If something goes wrong with the repair within a year, we make it right at no additional charge. No arguments, no fine print.
FAQs - Gate Parts & Welding Cost
How much does it cost to fix a gate hinge in Irving?
A standard hinge repair usually costs between $250 and $400, depending on whether we need to perform on-site welding or replace the hinge hardware entirely. Call (817) 510-4183 for an exact quote based on your specific gate setup.
Can you repair my gate motor instead of replacing it?
Yes, we prioritize repair over replacement whenever possible. Most board repairs and limit switch adjustments cost between $250 and $850, which is significantly less than the cost of a full gate operator replacement.
Do you provide free estimates for welding jobs?
Yes, we offer free estimates for all gate repairs and welding services. Call (817) 510-4183 to schedule a visit, and we will provide a written price before any work begins.
How long does a typical gate repair take?
Most routine repairs, such as welding a hinge or replacing a logic board, are completed in a single visit, usually within two to four hours. We carry parts for the nine brands we service-LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule-to minimize downtime.
Is it cheaper to repair or replace a gate?
In most cases, repairing a gate is more cost-effective, especially if the structural integrity of the frame remains sound. We will always provide an honest assessment, and if we believe a repair is not the best long-term solution, we will explain why in writing before you spend a dime.
Contact Vance Gate Repair
You need a gate that works reliably, and you deserve to know exactly what the repair will cost before it starts. We do not do “guesswork” estimates. We arrive, we document the issue, we provide a written price, and we execute the repair with the precision your property deserves. Whether you are dealing with a broken weld in a historic Irving home or a malfunctioning logic board on a commercial access gate, we have the experience to fix it correctly the first time.
We are available to answer your questions at any hour. A live person answers our phones 24/7, so you are never stuck in a voicemail loop. Call us at (817) 510-4183 to discuss your gate, get your questions answered, and schedule a free estimate. We are ready to help.
Pricing reflects the Irving market as of 2026. Vance Gate Repair Irving offers free estimates - call (817) 510-4183 - and provides Gate Parts & Welding services. Written by Adrian Vance, Owner at Vance Gate Repair, serving Irving since 2014.
What Our Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.