Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Carrollton
A new driveway gate in Carrollton typically runs $2,800 to $7,500 installed, depending on whether you’re building a single swing gate, a sliding gate on a long run, or a double gate at a wide rear entrance. Most installations take one to two days once materials are on-site, and we quote every job in writing before any work starts. If you’re planning a gate for a home off Belt Line, Hebron, or Rosemeade, call (817) 510-4183 and we’ll put a number on paper.
What makes gate installation different in Carrollton isn’t the hardware. It’s the soil. The Blackland Prairie clay under this city moves more than people realize, and a post set at the wrong depth will lean within a year. We plan every Carrollton install around that and around the age of the existing structure, because a large share of the gates we replace here were built in the 1980s and 1990s and were never engineered for the ground they sit on.
Vance Gate Repair has been doing Gate Installation and repair across the Dallas-Fort Worth metro since 2014, and our Carrollton work follows the same habit we started with on commercial access-control sites: written pricing before any tool gets picked up, and a photo record of everything we set, wire, and leave behind.
Why Vance Gate Repair Irving Is Carrollton’s Preferred Gate Installation Company
Carrollton homeowners tend to ask the same two questions before hiring anyone: “Can you write the price down?” and “Will you show me what you actually did?” Both come from experience with companies that quote low over the phone and bill high at the end. Our answer to both is yes, and it’s not a policy we invented for marketing. The Haven Standard, which Adrian Vance developed in 2014 doing commercial access-control documentation, applies to every residential gate job we run in Carrollton. Written scope, written price, photographic evidence on every single visit.
We work on whatever motor is already on the property. If your Carrollton home has a Viking operator from 2004, a Linear board from a 2011 build, or a BFT arm drive on a side entrance, our technicians know the wiring and the failure points without having to learn on your dime. We stock common parts locally for the Carrollton market, which means less waiting when a rack, a photocell, or a limit switch needs replacing mid-install.
When you call us from Carrollton, a live person answers. Not a voicemail tree, not a callback queue, not an automated attendant. Twenty-four hours a day. You’ll get a name, a dispatch window, and a written quote before the crew rolls. Scheduling is coordinated from our Dallas-Fort Worth office, and crews serve Carrollton directly.
Every job ends the same way: a photo log of what was found, what was set, what was wired, and the part numbers installed. That record is yours. And the work carries our 365-Day Done Right Promise. If it isn’t right within a year, we make it right, no fee and no argument.
Our Gate Installation Services in Carrollton
Slide Gate
Sliding gates are the workhorse choice for Carrollton driveways with a slope or a short setback, and they’re also the most sensitive to post movement. A sliding gate rides on a track or a cantilever rail, and if the anchor posts shift even half an inch in clay, the gate binds or the rack slips. We set slide gate posts below the active clay zone where the ground actually stabilizes. On a long driveway off Belt Line Road, we installed a Viking sliding gate for a homeowner whose original 1980s swing gate had sagged so badly the hinge post was leaning 6 inches out of plumb by August. We reset the post in a deep concrete collar past the clay zone, mounted the operator with a safety photocell and loop detector, and rebuilt the gate around a LiftMaster rack and pinion drive. It has stayed square through two wet springs and one dry summer. That’s the standard we build to here.
Double Gate
Wide rear entrances off alleys and ranch-style properties on Carrollton’s fringes often need a double gate, and that doubles the hardware and the alignment work. The critical spec on a double gate is the operator’s duty rating and the post diameter. An undersized post with two heavy leaves will deflect in Carrollton clay faster than anywhere with stable soil. We size posts, hinges, and operators for the actual leaf weight and span, and we document the load calculation in your job record. You’ll know what was installed and why.
Swing Gate
Swing gates remain the most common style in south Carrollton, where 1960s to 1980s brick ranches still carry original wrought-iron or cedar gates on aging hardware. The recurring problem in that housing stock is shallow footings. Original posts from that era were often set 24 to 30 inches deep, which doesn’t get past the active clay zone. A gate that swings freely after a wet March will drag the ground by August. We reset posts deeper and spec a sag correction kit where the gate design allows it. No callback in September because the ground moved.
Security Gate
Gated-entry communities and homes with long frontages off Hebron Parkway or Josey Lane often want more than curb appeal; they want controlled access. A security gate installation includes the operator, a safety photocell (the infrared beam that stops the gate if something crosses the path), and usually a loop detector in the driveway to hold the gate open for exiting vehicles. We wire these to a keypad, an intercom, or a phone-based access system, and we leave a wiring diagram in the job file so any future technician, including us, isn’t guessing at the circuit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Carrollton
We install and service nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That breadth matters in Carrollton because the market is split between older builds and newer HOA subdivisions. A 2005 Linear operator on a north Carrollton gated entry and a 1998 Viking arm drive in south Carrollton have completely different control boards and diagnostic paths. We don’t steer you toward replacing a motor just because we don’t stock the board. We stock parts for the brands already on Carrollton properties, and we repair what’s repairable.
Common Gate Installation Problems We See in Carrollton Homes
- Shallow post footings in expansive clay: the hinge post heaves and leans, and by late summer a swing gate binds or refuses to latch. The fix is a deeper footing that extends past the active clay zone, not a bigger hinge.
- 1980s cedar gates sagging at the hinge post: decades of soil movement and no sag correction kit mean the leaf drops, the latch mismatches, and the operator strains. Sometimes the gate can be re-hung with a proper kit; sometimes the post itself needs resetting.
- Gated-entry HOA operators failing after 20+ years: many LiftMaster and Linear units in north Carrollton subdivisions are reaching end of service life, and the first symptom is usually a misaligned photo-eye or a rack that slipped when the post moved.
- Long driveway power problems: running mains power to a gate at the far end of a Carrollton acreage property can cost more than the gate itself. Solar operators are a practical alternative, but they need to be sized for the gate weight and the number of cycles per day, not picked off a shelf.
Pricing for Gate Installation in Carrollton, TX
Here are honest ranges for Carrollton work, based on what we’ve actually quoted and installed here.
- Single swing driveway gate, manual: $1,800-$3,200
- Single swing gate with operator: $3,400-$5,200
- Sliding gate, steel frame with operator: $4,000-$7,500
- Double swing gate, heavy-duty operator: $5,500-$9,000
- Solar operator added to a long-driveway gate: $1,200-$2,400 extra
What moves the number: gate width and weight, whether the posts need resetting past the clay line, the operator brand and duty rating, and whether we’re running conduit for power. Every quote is written and handed to you before any work starts, under Haven Standard Clause 1. Call (817) 510-4183 for a free written estimate.
We Also Serve Cities Near Carrollton
Our crews regularly work in Carrollton and the surrounding communities, including Coppell, Plano, Grapevine, and Dallas. If your property sits near the city line or you have family in a neighboring town who needs gate work, we can usually coordinate multiple visits in one trip.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Carrollton
For a swing or slide gate post to stay plumb in Carrollton’s Blackland Prairie clay, it needs to be set at least 36 to 42 inches deep and anchored in a concrete collar that extends below the active clay zone, which here runs roughly 18 to 30 inches depending on the site. Original 1980s posts in south Carrollton were often set at 24 inches, which is exactly why they lean. If you already have a gate and the post is moving, call (817) 510-4183 and we’ll tell you what the soil is actually doing on your lot before we quote a reset.
Yes, and in Carrollton’s acreage and long-driveway properties it’s often the smarter choice than trenching conduit for hundreds of feet. A solar operator paired with a properly sized battery will handle a residential gate with reasonable daily cycles, but the panel and battery need to be specified for the gate’s weight and the motor’s draw. Undersizing the battery is the most common solar installation mistake we correct. Call (817) 510-4183 for a written quote that includes the operator, panel, battery, and mounting hardware.
Because your hinge post is moving, not your hinges. The clay under south Carrollton expands when it rains in spring and contracts hard during dry summers, and a post set shallow will heave and settle with it. You rehang the gate in March when the post is high, and by August the post sinks an inch or two and the gate drags. Rehanging alone won’t fix it. The post has to come out and be reset below the active clay zone, in a deeper concrete collar. That’s the only fix that holds. Call (817) 510-4183 and we’ll verify the post depth and the actual movement before we quote it.
If the gate is your primary driveway entrance and you don’t have a separate exit, you should have both. A safety photocell protects against the gate closing on a person or vehicle in the path. A loop detector, buried in the driveway, tells the operator when a vehicle is sitting on the approach so the gate doesn’t close on it or cycle unnecessarily. On Carrollton properties where the driveway is also used by delivery trucks or school pickups, we recommend a loop detector on the inside exit lane and a photocell across the gate opening. Both are standard on the security gate installs we quote. Call (817) 510-4183 for a written scope that includes both devices if your layout needs them.
A properly specified heavy-duty operator can handle a double gate with a combined leaf span up to roughly 20 feet in steel construction, and about 16 feet if the leaves are solid wood or cedar, assuming the posts are deep and the hinges are rated for the actual weight. Beyond that width, we typically recommend a sliding gate instead, because the arm or the rack sees less stress and the operator lasts longer. The real constraint in Carrollton is usually the posts, not the motor. Call (817) 510-4183 and we’ll spec the gate width, post diameter, and operator duty rating for your entrance, in writing, before any work begins.
Written by Adrian Vance, Owner at Vance Gate Repair Irving, serving Carrollton, TX since 2014.