Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDriveway Gate in Irving, TX
Driveway gate repairs in Irving generally range from $150 for minor sensor adjustments to $850 for complete motor component overhauls, depending on the specific model and damage extent. At Vance Gate Repair, we provide upfront, written pricing before any work begins, ensuring you never face surprise invoices. Whether your gate system is suffering from a failed capacitor due to the Irving summer heat or a misaligned safety beam, we have the parts and technical documentation to get it moving again, and we also offer Gate Installation services. Call (817) 510-4183 to schedule a visit from our team.
We operate under The Haven Standard, which means every service call includes a detailed photo record of what we found, what we adjusted, and what we replaced. This documentation is left with you, ensuring that any future technician knows exactly what was done to your system. If you are looking for a new setup, our Gate Installation in Irving page details our process for full system replacements and upgrades. We are a locally operated business, and we treat every driveway gate as a critical security component for your property.
When You Need Driveway Gate Service
Driveway gates are heavy machines that run through thousands of cycles. In Irving, we frequently see issues caused by shifting soil affecting post alignment and the intense heat degrading sensitive electronic components inside motor housings, including those controlling Pedestrian Gate systems. If you notice any of the following, your system likely needs a professional inspection:
- The gate strikes the ground or drags: This typically signals hinge fatigue or a shifting gate post. We often see this in Irving neighborhoods with heavy clay soil that expands and contracts, throwing the gate out of level.
- The motor hums but the gate does not move: This is a classic symptom of a failed start capacitor. These components are sensitive to the high temperatures we experience in North Texas and often need replacement after 3 to 5 years.
- The gate reverses before closing: This often means the photo-eye (the infrared beam that stops the gate if something crosses the path) is misaligned by as little as an inch. Vibration from wind or traffic can knock these sensors out of position.
- Intermittent power loss: If your system works sometimes but fails others, the issue is often a loose connection in the control board or a failing power supply. We trace the wiring diagram to find the exact break in the circuit.
- Grinding noises during travel: This indicates worn-out gears or a lack of lubrication in the chain drive. Running a gate with metal-on-metal grinding will eventually strip the gears, turning a simple lubrication job into a costly motor replacement.
Safety is the primary concern when working on these systems. Driveway gates are heavy and operate under significant force. If you suspect your system has a mechanical failure, do not attempt to force the gate open or closed by hand, as this can cause the gate to fall or the motor to release stored tension. Call (817) 510-4183 and let a trained technician handle the repair safely.
Our Driveway Gate Process
We follow a strict, documented process for every service call. Adrian Vance developed these protocols based on his years of experience in commercial access control, bringing that same level of rigor to every residential driveway gate we service.
- Arrival and Site Assessment: Our technician arrives in a marked vehicle. We test the gate operation through a full cycle to observe the failure point. We do not guess at the problem; we observe it.
- Documentation of Findings: Under Clause 4 of The Haven Standard, we photograph the current state of your gate motor, control board, and safety sensors. This photo record is part of your permanent file.
- Written Scope and Price: Before we touch a single tool, we provide a written estimate. This includes the cost of parts, labor, and exactly what we intend to fix. You approve the price in writing first.
- Execution and Replacement: We perform the repair using brand-specific components. Whether your system uses FAAC, Linear, or Viking hardware, we use the correct parts that match your motor’s specifications.
- Verification and Handover: We test the gate again to ensure the limit switches are set correctly and the safety sensors are functioning. We review the photo record with you, showing you the new parts installed, and provide our 365-Day Done Right Promise on the work.
Every job we complete is backed by our 365-Day Done Right Promise. If the repair does not hold, we make it right at no additional charge. We believe that if you pay for a repair in Irving, it should stay fixed.
BeforeAfterDriveway Gate Pricing in Irving
We provide upfront, flat-rate pricing for all repairs. Because we do not use “call for a quote” tactics, we have outlined the typical cost ranges for common driveway gate services below, including our How Much Does Gate Installation Cost? (2026 Price Guide) - Irving, TX. These prices reflect the cost of parts and professional labor in the Irving market.
- Safety Sensor Realignment: $150 - $225. This covers the time to re-calibrate the infrared beams and clean the lenses.
- Capacitor Replacement: $200 - $300. Includes the part and the labor to test the start-up voltage and install the new component.
- Control Board Repair or Replacement: $350 - $850. Varies based on the specific board model and programming requirements.
- Gate Hinge Welding or Repair: $250 - $500. Pricing depends on the extent of the structural damage and the amount of steel work required.
- Limit Switch Adjustment: $175 - $250. This ensures the gate stops at the exact point required to close the loop securely.
If you have a written estimate from another company, we offer a free second opinion. Bring the paperwork to our technician, and we will review the scope to ensure you are not paying for unnecessary work. Call (817) 510-4183 to discuss your gate needs or to request a site visit.
FAQs – Driveway Gate
Is it cheaper to repair or replace my driveway gate motor?
Most driveway gate motors can be repaired unless the internal gear assembly is completely stripped or the motor housing has suffered catastrophic water damage. We prioritize repair because it is usually more cost-effective than a full replacement, and we have access to parts for nine major brands, including BFT, Viking, and Ghost Controls. Call (817) 510-4183 so we can diagnose your specific motor and give you an honest recommendation on whether a repair is viable.
Can you fix my gate today?
We provide prompt service to all our customers in Irving. Because we are a local team, we can often schedule same-day or next-day appointments for urgent gate failures. When you call (817) 510-4183, a live person will answer to discuss your timeline and get a technician on the schedule.
Do you work on all gate brands?
We service nine major automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We focus on the mechanics of the system rather than steering you toward one specific brand, so we can work on whatever motor is already installed on your property.
What does your 365-Day Done Right Promise cover?
Our promise covers all completed repairs for one full year. If the component we installed fails or the adjustment we made does not hold, we will return to fix it at no additional charge. This is our commitment to quality work, ensuring that our customers in Irving have a functional and secure gate year-round.
If you are ready to get your gate working properly, give us a call at (817) 510-4183. We are ready to help with your driveway gate, from simple sensor issues to complex motor repairs. You can also visit our home page to see our full list of services.
Written by Adrian Vance, Owner at Vance Gate Repair Irving, serving Irving.