Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Plano
Gate installation in Plano typically runs $1,800 to $6,400 depending on the gate type, operator brand, and whether your HOA requires ornamental iron or tubular steel. Most residential driveway gate installations take one to two days once materials are on site, and we schedule Plano work every week. If you’re in a master-planned community around Legacy or Willow Bend, you already know the architectural-review step matters before the first post hole gets dug. Call (817) 510-4183 and we’ll walk you through the whole process, HOA paperwork included.
Why Vance Gate Repair Irving Is Plano’s Preferred Gate Installation Company
Plano homeowners call us for one specific reason: we write the price down before anyone picks up a tool. That’s our standard on every job, from a pedestrian gate in a 75093 subdivision to a full sliding driveway gate off Preston Road. No verbal estimate that doubles by Friday. The price you approve is the price on the invoice.
We also bring the documentation habit Adrian Vance built doing commercial access-control work starting in 2014. Every Plano installation leaves a photo record: the post footings before concrete, the operator wiring before the cover goes on, the limit-switch readings after setup. You get copies. We file copies. If a future tech ever needs to know what was installed, the answer is in the record, not in someone’s memory.
A live person answers our phone 24 hours a day, seven days a week. When you call about a gate that won’t close or an operator that died on a 2005 LiftMaster slide unit, you talk to a person who can schedule the work. Not a voicemail loop.
Key takeaways:
- Written price before work starts, every job, no exceptions.
- We handle HOA architectural-review paperwork for Plano subdivisions.
- Nine major operator brands serviced: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule.
- 365-Day Done Right Promise on all completed work.
- Documented photo record on every visit, at no extra charge.
Our Gate Installation Services in Plano
Driveway Gate Installation
Most driveway gates we install in Plano are ornamental iron or tubular steel, primarily because the HOAs governing neighborhoods like the Legacy corridor and Willow Bend mandate them. We handle the full scope: post excavation and concrete footings below the clay heave zone, gate fabrication or procurement, operator installation, safety photocells, and final HOA walkthrough if your committee requires one. A typical single-swing driveway gate with operator runs $3,400 to $6,400 in Plano, depending on width, finish, and whether we’re running power from the house or a nearby outlet.
Pedestrian Gate Installation
Pedestrian gates in Plano often fail at the post before the gate itself. The Blackland Prairie clay swells with spring rain and shrinks in August, torquing posts out of plumb within a few wet-dry cycles. We set posts in concrete below the active clay layer and use heavier-gauge posts than the big-box standard. A pedestrian gate with new posts and hardware typically runs $900 to $1,800 in Plano. If you’re matching an existing wrought-iron fence line, we’ll match the picket style and finish so the new gate doesn’t look like an afterthought.
Sliding Gate Installation
Sliding gates are common on Plano estate properties along Preston Road and Shiloh Road where driveway widths exceed what a swing gate can reasonably cover. The gate rides on a track or cantilever rollers, and the critical detail is the pad: a reinforced concrete base that won’t shift when the clay moves under it. Sliding gate installation in Plano, including the operator, typically runs $4,200 to $7,800 depending on gate length, track style, and operator brand. We install Viking and Linear slide operators regularly on these larger properties.
Swing Gate Installation
Swing gates are the majority of what we install in Plano. Single-swing for standard driveways, double-swing for wider entrances. The hinge post is the failure point nearly every time in this area, which is why we over-engineer the footing from the start. A double-swing ornamental iron driveway gate with operator runs $4,800 to $8,200 in Plano. That includes the concrete work, the gate panels, the operator, safety edges, and the photo-eye set at the correct height for Plano’s typical vehicle mix of SUVs and pickups.
Our full Gate Installation team handles every step in-house, from welding to wiring to operator programming. You’re not coordinating three different subcontractors.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Plano
We work on whatever motor is already on your property, and we install the brands that hold up in Plano’s heat. FAAC and BFT are common choices for swing gates in the Preston Road corridor; Linear and Viking slide operators dominate the estate properties in 75093 and 75024. We stock replacement circuit boards and limit switches for all of them, which means a failed board on a 2005 operator doesn’t always mean a full replacement. We’ll tell you honestly when repair makes sense and when you’re throwing money at a motor that’s already past its service life.
Common Gate Installation Problems We See in Plano Homes
- HOA compliance before installation. Plano’s master-planned subdivisions, especially those built from the late 1970s through the 1990s, carry deed restrictions requiring ornamental iron or tubular steel gates. If your architectural-review committee hasn’t signed off, the city won’t finalize the permit, and you’ll pay twice for the same gate.
- Expanding clay heaving posts out of plumb. The Blackland Prairie soil under most Plano properties swells dramatically after spring rains and shrinks in summer drought. A gate that swings clean in July can bind and scrape by April. We pour footings below the active clay zone, which most original installations in this area did not.
- Legacy operators failing simultaneously. The automated gate operators installed across Plano’s upscale subdivisions during the early 2000s building boom are hitting end-of-life together. We see stripped worm gears and heat-failed circuit boards constantly in 75093 and 75024. A 2005 LiftMaster isn’t an antique; it’s just done.
- Sprinkler-driven rust on hollow tubular steel. Years of sprinkler overspray hitting the bottom rail of a tubular steel gate, combined with weeks of 100°F heat, corrodes the metal from the inside out. By the time you see rust staining, the bottom rail is usually too thin to weld. That’s a panel replacement, not a sag adjustment.
Pricing for Gate Installation in Plano, TX
Here are the ranges we quote most often for Plano work:
- Pedestrian gate with new posts: $900 to $1,800
- Single-swing driveway gate with operator: $3,400 to $6,400
- Double-swing driveway gate with operator: $4,800 to $8,200
- Sliding driveway gate with operator: $4,200 to $7,800
- Operator-only replacement on existing gate: $1,100 to $2,400
What moves the price: gate width and weight, finish (powder coat costs more than paint), operator brand, whether we need to run new power from the house, and whether the HOA requires specific materials or a particular gate style. The price we quote is the price on your invoice. It’s written down before any work begins, per our Haven Standard. No surprise line item at the end. Call (817) 510-4183 for a free estimate, and we’ll put the numbers in writing.
We Also Serve Cities Near Plano
Our crews serve Plano and the surrounding metro every week. If you’re in Carrollton, Coppell, Dallas, or Irving, the same written-price standard and documented photo record apply. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and we route technicians to your area on a regular schedule. Call (817) 510-4183 and we’ll get you on the calendar.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Plano
Yes, in most cases we can repair the existing gate by resetting the hinge post, welding new hinge barrels, and correcting the alignment, rather than replacing the whole panel. The deciding factor is rust: if the bottom rail is corroded through from years of sprinkler overspray, no weld will hold, and you’re looking at a new gate panel. In Plano’s subdivisions where deed restrictions mandate ornamental iron, Gate Repair in Plano is almost always cheaper than replacement when the metal is sound. Call (817) 510-4183 and we’ll inspect it, photograph the damage, and show you exactly what can be saved.
If the circuit board overheated or the worm gear stripped, replacement parts are still available for most LiftMaster slide operators from that era, but you should weigh the cost carefully. A board replacement on a 20-year-old operator typically runs $400 to $800; a new operator installed starts around $1,100 to $1,800. If the motor itself is still sound and the gate moves freely by hand, repair is usually the better call. If the motor bearings are starting to whine, replacement is cheaper over three years. We’ll quote both options in writing before you commit to either.
The Blackland Prairie clay under Plano expands when wet, pushing your gate posts slightly out of alignment, then shrinks in summer drought and leaves the gate scraping or binding again. The permanent fix is resetting the posts in concrete footings that extend below the active clay layer. Most original installations in Plano were set in shallow footings, which is why this problem recurs seasonally across neighborhoods like Willow Bend and the Legacy corridor. We photograph the post lean, show you the measurements, and quote the reset as its own line item.
Yes. We handle the HOA architectural-review submission for Plano installations as a standard part of Gate Installation. That means we provide the material specs, gate style drawings, finish samples, and any required documentation your committee asks for, and we do not start work until the approval is in writing. Out-of-area competitors routinely skip this step, and the homeowner discovers the problem when the HOA sends a violation notice. We would rather do the paperwork once than watch you redo the gate. Call (817) 510-4183 and we’ll start the process.
The two non-negotiable safety components are a photo-eye that stops and reverses the gate when something crosses the path, and a safety edge on the leading edge of the gate itself. In Plano, we use photocells from the same brands as the operators we install, and we set the beam height to match the vehicles in your driveway, usually 18 to 24 inches off the finished surface. If your gate was installed before 2010, it likely has no safety edge and a misaligned photo-eye. We recheck both on every installation and leave you with a written verification sheet. The 365-Day Done Right Promise covers all safety adjustments we make within the first year.
Call Vance Gate Repair Irving for Gate Installation in Plano
If you’re dealing with a sagging iron gate, a dead operator from 2005, or an HOA letter demanding a replacement, call us. We’ll photograph what’s there, hand you a written price, and get the work scheduled. Plano’s clay soil and HOA process are not mysteries to us; we deal with both every single week. Call (817) 510-4183 for a free estimate. A person answers, day or night.
Written by Adrian Vance, Owner at Vance Gate Repair Irving, serving Plano homeowners since 2014 with gate installation, repair, and operator service.